1. Device Family:

️· Type: Zener Diodes
️· Series: CD4678 through CD4717

2. Key Specifications (from the Table):

Device Number	Vz (V)	Tolerance
CD4678	3.7
CD4679	4.7
CD4680	5.1
CD4694	8.2
CD4696	9.1
CD4700	13.0
CD4702	28.0
CD4704	36.0
CD4717	43.0

3. Metallization Details:

️· Top (Anode): Aluminum (Al) - 25,000 Å minimum thickness
️· Back (Cathode): Gold (Au) - 4,000 Å minimum thickness

4. Chip Thickness:

️· 10 Mils (approximately 0.254 mm)

5. Design Notes/Circuit Layout Data:

️· For Zener operation, the cathode must be operated positive with respect to the anode.

6. Dimensional Tolerances:

️· All dimensions + 2 mils.

7. Figures and Graphs (Summarized):

️· Figure 5 (Power Derating Curve): Shows the maximum power dissipation (in Watts) versus ambient temperature (in °C). The maximum power decreases as temperature increases.
️· Figure 5 (Zener Impedance vs. Operating Current): Shows how the Zener impedance changes with the DC operating current. The impedance is generally higher at lower currents.

Important Notes:

️· Tolerance: The table does not provide a consistent tolerance value for the Zener voltage. Note 5 mentions a standard tolerance of "+ 5% of the nominal Zener voltage." You're advised to consult the full datasheet for more precise tolerance information.
️· Full Datasheet: This information is extracted from what you've provided. Always refer to the complete datasheet for the most accurate and comprehensive specifications.
️· Å (Angstrom): 1 Å = 10^-10 meters.