1. Product Overview & Series

️· Product Name: MADP-042XX8-13060 Series (Surmount PIN Diodes)
️· RoHS Compliant: Yes
️· Technology: 8µM PIN Diodes

2. Electrical Characteristics and Graphs

The document contains several graphs which I am unable to fully decipher. I can describe their intent but can't provide precise numerical values.

️· Rs vs. Frequency (Graphs 1-3): These graphs show the series resistance (Rs) of the diode at different frequencies (GHz). The values are dependent on the specific part number within the series.
️· Cj vs. Frequency (Graphs 1-3): These graphs show the junction capacitance (Cj) of the diode at different frequencies (GHz). The values depend on the specific part number within the series.
️· Rs vs. Bias Current (Graph 3): This graph shows the relationship between series resistance (Rs) and DC bias current for a specific part number. The higher the bias current, the higher the Rs.
️· I-V Characteristics Graph: This graph shows the relationship between the bias current and the voltage on the diode.
️· Cj vs. Bias Current: Junction capacitance changes with bias current.

3. Handling Procedures

️· ESD Sensitivity: All semiconductor chips are sensitive to ESD. Use plastic-tipped tweezers or vacuum pickups.
️· Attachment Methods:
- Surface Mount Technology: Recommended.
- Solder: 80Au/20Sn or RoHS-compliant solders.
- Conductive Silver Epoxy: Acceptable for high average power applications (~1W). Requires specific curing (1 hour at 150°C).
️· Bonding:
- Hot Gas Die Bonding: Preferred
- Soft Solder: Recommended for soft substrates (Duroid)
️· Reflow: Heat should not be applied to the top surface of the die. The edges of the pads can be visually inspected.
️· Reference: See Application Note M538 ([http://www.macomtech.com/Application%20Notes/pdf/M538.pdf](http://www.macomtech.com/Application%20Notes/pdf/M538.pdf)) and [www.macomtech.com](http://www.macom.com/) for re-flow profiles.

4. Ordering Information

️· Suffixes: Add appropriate suffix to the part number for ordering options:
- G: Gel Pack
- T: Tape and Reel (Surf Tape)
- P: Tape and Reel (Pocket Tape)
️· Part Number Examples:
- MADP-042308-13060G (Gel Pack)
- MADP-042408-13060T (Tape and Reel - Surf Tape)
- MADP-042908-13060P (Tape and Reel - Pocket Tape)
️· Reference: See Application Note M513 ([http://www.macomtech.com/Application%20Notes/pdf/M513.pdf](http://www.macomtech.com/Application%20Notes/pdf/M513.pdf)) and [www.macomtech.com](http://www.macom.com/) for tape and reel dimensions.



Limitations due to Visual Data

️· Numerical Values: The electrical data is graphically represented, so extracting precise values without the original data source is difficult. I have described the general trends, but exact values are not available from my analysis of the text.
️· Part Number Specific Data: The documents imply that electrical characteristics vary based on the exact part number (e.g., MADP-042308-13060 vs. MADP-042408-13060). I'd need to be able to see all the graphs for each part number to give a complete picture of the series.