# PE346-24: TNC Male to TNC Male Right Angle Low Loss Test Cable

## Cable Specifications

️· Connectors: TNC Male (Connector 1), TNC Male Right Angle (Connector 2)
️· Cable Type: PE-P142LL
️· Length: 24 inches (609.6 mm) - Tolerance of 1.5% or ± 3/8”
️· Diameter: 1.134 inches (28.8 mm)
️· Weight: 0.0768 lbs (34.84 g)
️· Impedance: 50 Ohms
️· Dielectric Type: PTFE

## Electrical Performance

️· Frequency Range: DC to 18 GHz
️· VSWR: < 1.35:1
️· Velocity of Propagation: 83%
️· RF Shielding: > 95 dB
️· Insertion Loss (Typical): 0.045 dB @ 0.4 GHz, increasing to 0.166 dB @ 5 GHz
️· Power Handling (Max): Up to 1200 Watts @ 0.4 GHz, decreasing to 300 Watts @ 5 GHz (Power handling varies based on VSWR)

## Mechanical Features

️· Cable Jacket: FEP, Green
️· Shielding: 3 layers – Silver Plated Copper Tape, Aluminum Polyester, Silver Plated Copper Wire
️· Minimum Bend Radius: 1 inch (Repeated), 1.5 inches (Overall)

## Connector Details

️· Material & Plating (Both Connectors): Beryllium Copper, Gold plated
️· Outer Conductor Material & Plating: Passivated Stainless Steel
️· Hex Size: 9/16 Inch (Both Connectors)
️· Specification: MIL-STD-348, Figure 313-3

## Environmental

️· Operating Temperature Range: -55°C to +125°C
️· Compliance: RoHS compliant

## Ordering Information

️· Part Number Configuration: PE346 - xx uu
- xx = Length
- uu = Unit of Measure (cm = Centimeters, <blank> = Inches)
️· Example: PE346-12 = 12 inches, PE346-100cm = 100 cm