| Manufacturer | Part # | Datasheet | Description |
PHOENIX CONTACT
|
PLC-BSP-48DC |
116Kb/9P |
6.2 mm PLC basic terminal block with spring-cage connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 48 V DC |
WAGO Kontakttechnik Gmb...
|
781-992 |
599Kb/17P |
2-conductor through terminal block; 4 mm짼; suitable for Ex e II applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP짰; 4,00 mm짼; light gray
29.12.2021 |
PHOENIX CONTACT
|
PLC-BPT-24DC |
111Kb/9P |
14 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 24 V DC |
| PLC-BPT-5DC |
64Kb/3P |
6.2 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 5 V DC |
| PLC-BPT-48DC |
58Kb/3P |
6.2 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 48 V DC |
WAGO Kontakttechnik Gmb...
|
769-238-281-410 |
674Kb/11P |
1-conductor/1-pin component carrier terminal block; with diode 1N4007; anode, left side; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm짼; CAGE CLAMP짰; 4,00 mm짼; gray
29.12.2021 |
| 780-992 |
568Kb/16P |
2-conductor through terminal block; 2.5 mm짼; suitable for Ex e II applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP짰; 2,50 mm짼; light gray
29.12.2021 |
PHOENIX CONTACT
|
PLC-BPT-60DC |
58Kb/3P |
6.2 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 60 V DC |
| PLC-BSP-12DC |
110Kb/9P |
14 mm PLC basic terminal block with spring-cage connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 12 V DC |
| PLC-BSP-60DC |
116Kb/9P |
6.2 mm PLC basic terminal block with spring-cage connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 60 V DC |
| 2959793 |
83Kb/3P |
Side element with foot, however without PCB guide, labeling with SSZB, mounted along the length of the DIN rail NS 35/7.5. Height: 36 mm, width: 10 mm, length: 45 mm. |
| PLC-BSP-24UC |
109Kb/9P |
14 mm PLC basic terminal block with spring-cage connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 24 V AC/DC |
| PLC-BSP-120UC |
109Kb/9P |
14 mm PLC basic terminal block with spring-cage connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 PDTs, input voltage 120 V AC/DC |
| 2891053 |
46Kb/2P |
The FL DIN RA is installed in a standard, 19-inch rack (EIA-310-D, IEC 60297-3-100) to allow DIN rail mounted equipment to be rack mounted Why buy this product |
WAGO Kontakttechnik Gmb...
|
2002-6301 |
1Mb/25P |
3-conductor through terminal block; 2.5 mm짼; suitable for Ex e II applications; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Pushin CAGE CLAMP짰; 2,50 mm짼; gray
23.11.2021 |
| 2002-3228 |
815Kb/20P |
Triple-deck terminal block; Shield/through/through terminal block; 2.5 mm짼; Shielding/L/L; without marker carrier; for DIN-rail 35 x 15 and 35 x 7.5; Pushin CAGE CLAMP짰; 2,50 mm짼; gray
24.11.2021 |
| 2206-1201 |
775Kb/15P |
2-conductor through terminal block; with push-button; 6 mm짼; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP짰; 6,00 mm짼; gray
24.11.2021 |
| 2206-1301 |
779Kb/15P |
3-conductor through terminal block; with push-button; 6 mm짼; with test port; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP짰; 6,00 mm짼; gray
24.11.2021 |
PHOENIX CONTACT
|
2297620 |
139Kb/5P |
The PROFIBUS module EM-PB-GATEWAY-IFS, certified as per DPV1 specification (EN 50170), connects up to 32 motor management modules (EMM-...IFS) or other INTERFACE system devices via the TBUS DIN rail connector. |
| PLC-BSP-24DC |
59Kb/4P |
14 mm PLC basic terminal block for high continuous currents with spring-cage connection, without relay or solidstate relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 24 V DC |
English ▼ 
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
