| Electronic Components Datasheet Search |
|
445 12 Distributor |
| Distributor | Part # | Manufacturer | Description | Price | Qty. BuyNow | |
![]() Onlinecomponents.com | 445 | GEARWRENCH | PLR SNP RNG INT RoHS : Compliant |
| 0 | |
| 219-3-2600-445 | Sensata Circuit Breakers | Hydraulic Magnetic Circuit Breaker, 3 Pole, 209 Series | Sensata - Airpax 219-3-2600-445 RoHS : Compliant |
| 0 | ||
| DW-12-09-F-D-445 | Samtec Inc | .100" Flex Stack, Flexible Board Stacker, .110" Tail RoHS : Compliant |
| 0 | ||
| 307-012-445-168 | EDAC Inc | Card Edge Connector - 12 Contacts - 0.156” (3.96mm) Pitch - Single Row - 0.062” (1.57mm) Thick PCB - Board Mount RoHS : Compliant |
| 0 | ||
| 357-012-445-168 | EDAC Inc | Card Edge Connector - 12 Contacts - 0.156” (3.96mm) Pitch - Single Row - 0.062” (1.57mm) Thick PCB - Board Mount RoHS : Compliant |
| 0 | ||
| TW-12-12-L-D-550-445 | Samtec Inc | FLEXIBLE SURFACE MOUNT BO RoHS : Compliant |
| 0 | ||
| 807-012-445-112 | EDAC Inc | High Temp Card Edge Connector - 12 Contacts - 0.156” (3.96mm) Pitch - Single Row - 0.062” (1.57mm) Thick PCB - Board Mount RoHS : Compliant |
| 0 | ||
| TW-10-12-G-D-500-445 | Samtec Inc | 2Mm Terminal Strips |Samtec TW-10-12-G-D-500-445 RoHS : Compliant |
| 0 | ||
| HW-12-15-F-S-445-SM | Samtec Inc | Conn Board Stacker HDR 12 POS 11.3mm Stack Height 2.54mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| HW-12-15-G-D-445-SM-A | Samtec Inc | .100" Flex Stack, High-Temp Flexible Board Stacker, Surface Mount RoHS : Compliant |
| 0 | ||
| TW-12-06-F-D-445-090 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZW-12-09-L-D-445-170 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-12-06-F-D-445-SM-P-TR | Samtec Inc | 2Mm Terminal Strips |Samtec TW-12-06-F-D-445-SM-P-TR RoHS : Compliant |
| 0 | ||
| GA2-B1-12-445-11-ME | Carling Technologies | GA2B11244511ME RoHS : Compliant |
| 0 | ||
| GA1-B1-12-445-11-ME | Carling Technologies | GA1B11244511ME RoHS : Compliant |
| 0 | ||
![]() Verical | 4451293001 | TE Connectivity | Hook-up Wire 20AWG 1.55mm Tinned Copper Yellow 1300VAC RoHS : Compliant |
| 9,198 | |
| 44512-0090 | OMRON Corporation | Switch Access Cord Grip Safety Interlock Switch RoHS : Compliant |
| 995 | ||
| 44512-0640 | OMRON Corporation | 44512-0640 |
| 39 | ||
![]() Avnet Americas | 4-644512-7 | TE Connectivity | - Tape and Reel (Alt: 4-644512-7) RoHS : Compliant | 0 | ||
| 4-644512-9 | TE Connectivity | - Tape and Reel (Alt: 4-644512-9) RoHS : Compliant | 0 | |||
| 5-644512-5 | TE Connectivity | - Tape and Reel (Alt: 5-644512-5) RoHS : Compliant | 0 | |||
| 63445-1229 | Molex | Anvil, 207126 Series, Molex 638208400, 638608400, 638655100 & 639004700 FineAdjust Applicators - Bulk (Alt: 0634451229) RoHS : Compliant |
| 0 | ||
| 3-644512-7 | TE Connectivity | - Tape and Reel (Alt: 3-644512-7) RoHS : Compliant | 0 | |||
| 3-644512-3 | TE Connectivity | - Tape and Reel (Alt: 3-644512-3) RoHS : Compliant | 0 | |||
| 4-644512-8 | TE Connectivity | - Tape and Reel (Alt: 4-644512-8) RoHS : Compliant | 0 | |||
| EB445-12-500 | Amphenol Corporation | - Bulk (Alt: EB445-12-500) RoHS : Compliant |
| 0 | ||
| 5-644512-8 | TE Connectivity | - Tape and Reel (Alt: 5-644512-8) RoHS : Compliant | 0 | |||
| 4-644512-3 | TE Connectivity | - Tape and Reel (Alt: 4-644512-3) RoHS : Compliant | 0 | |||
| 5-644512-2 | TE Connectivity | - Tape and Reel (Alt: 5-644512-2) RoHS : Compliant | 0 | |||
| 5-644512-7 | TE Connectivity | - Tape and Reel (Alt: 5-644512-7) RoHS : Compliant | 0 | |||
| 4-644512-2 | TE Connectivity | - Tape and Reel (Alt: 4-644512-2) RoHS : Compliant | 0 | |||
| FW-07-05-G-D-445-125-P-TR | Samtec Inc | Board Stackers & Spacers, Pin Header, 11.3 mm, 14 Contacts, Solder, 2 Rows, 1.27 mm, FW Series - Tape and Reel (Alt: FW-07-05-G-D-445-125-P-TR) RoHS : Compliant |
| 0 | ||
| 202E344-51/225-0 | TE Connectivity | Heat Shrink Boot Chemical-Resistant Fluoroelastomer Straight Black - Bulk (Alt: 202E344-51/225-0) RoHS : Not Compliant | 0 | |||
![]() Mouser Electronics | 44512-0640 | OMRON Corporation | Basic / Snap Action Switches SC12-5M40 |
| 5 | |
| 44512-0080 | OMRON Corporation | Basic / Snap Action Switches SC12-M16CG80 |
| 3 | ||
| 44512-0600 | OMRON Corporation | Basic / Snap Action Switches SC12-5M00 |
| 2 | ||
| 44512-0140 | OMRON Corporation | Switch Hardware SL12-CB110 |
| 1 | ||
| 44512-0620 | OMRON Corporation | Basic / Snap Action Switches SC12-5M20 |
| 1 | ||
| 44512 | icotek Corporation | Cable Mounting & Accessories KDRS-ESR-VX25-600 (Slim) 75mm |
| 0 | ||
| 44512-0090 | OMRON Corporation | Switch Hardware SC12-M20CG90 |
| 0 | ||
| 44512-3400 | OMRON Corporation | Switch Contact Blocks / Switch Kits SCB-T3400 |
| 0 | ||
| 44512-2221 | OMRON Corporation | Basic / Snap Action Switches SCB-ID22 |
| 0 | ||
| 44512-0630 | OMRON Corporation | Basic / Snap Action Switches SC12-10M30 |
| 0 | ||
| 44512-0650 | OMRON Corporation | Basic / Snap Action Switches SC12-10M50 |
| 0 | ||
| 44512-3010 | OMRON Corporation | Switch Hardware UNIVERSAL MOUNTING BRACKET FOR NON CONTACT INTERLOCK SWITCHES. |
| 0 | ||
| 44512-0460 | OMRON Corporation | Basic / Snap Action Switches NA |
| 0 | ||
| 44512-0470 | OMRON Corporation | Basic / Snap Action Switches NA |
| 0 | ||
| 44512-0100 | OMRON Corporation | Switch Hardware SC12-M200 |
| 0 | ||
![]() Newark | 744393445120 | Wurth Elektronik | Smd Power Ind, 12Uh, 6.6A, Shielded; |Würth Elektronik 744393445120 RoHS : Compliant |
| 1,316 | |
| 744393445120 | Wurth Elektronik | Smd Power Ind, 12Uh, 6.6A, Shielded; |Würth Elektronik 744393445120 RoHS : Compliant |
| 1,316 | ||
| ZW-04-10-T-D-445-120 | Samtec Inc | Conn Stack Brd, 2.54Mm, 8Pos, Hdr; |Samtec, Inc. ZW-04-10-T-D-445-120 RoHS : Compliant |
| 713 | ||
| 7445120 | Wurth Elektronik | Choke, 100Uh, Smd; |Würth Elektronik 7445120 RoHS : Compliant |
| 500 | ||
| 7445120 | Wurth Elektronik | Choke, 100Uh, Smd; |Würth Elektronik 7445120 RoHS : Compliant |
| 500 | ||
| HW-07-10-S-D-445-125 | Samtec Inc | Conn Stack Brd, 2.54Mm, 14Pos, Hdr; |Samtec, Inc. HW-07-10-S-D-445-125 RoHS : Compliant |
| 459 | ||
| ZW-13-12-L-D-445-125 | Samtec Inc | Conn Stack Brd, 2.54Mm, 26Pos, Hdr; |Samtec, Inc. ZW-13-12-L-D-445-125 RoHS : Compliant |
| 442 | ||
| 74451222 | Wurth Elektronik | Choke, 220Uh, Smd; |Würth Elektronik 74451222 RoHS : Compliant |
| 214 | ||
| 74451222 | Wurth Elektronik | Choke, 220Uh, Smd; |Würth Elektronik 74451222 RoHS : Compliant |
| 214 | ||
| 445120650 | OMRON Scientific Technologies Inc | Sc12-10M50; |Omron Sti 445120650 RoHS : Not Compliant |
| 132 | ||
| 74451215 | Wurth Elektronik | Choke, 150Uh, Smd; |Würth Elektronik 74451215 RoHS : Compliant |
| 60 | ||
| 74451215 | Wurth Elektronik | Choke, 150Uh, Smd; |Würth Elektronik 74451215 RoHS : Compliant |
| 60 | ||
| T4451-2 | CK tools | Universal Cross Key 9 In 1; |Ck Tools T4451-2 (Alternate Part Number: 5013969704549 RoHS : Not Compliant |
| 9 | ||
| FMCA1445-12 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, Snap-On, 12", 305Mm; |Fairview Microwave FMCA1445-12 RoHS : Not Compliant |
| 9 | ||
| 09 14 004 4512 | HARTING Technology Group | Han Multi Module, Female; |Harting 09 14 004 4512 RoHS : Compliant |
| 2 | ||
![]() RS | SC12-5M00 (445120600) | OMRON Industrial Automation | SC12-5M00 |
| 3 | |
| SC12-M20A10 (445120110) | OMRON Industrial Automation | ADAPTER CONDUIT SIZE M20 TO 1/2 IN. CONDUIT |
| 3 | ||
| SCB-ID22 (445122221) | OMRON Industrial Automation | SCB-ID22, CONTACT BLOCK 2N/C+2N/O, FOR IDEM ROPE PULL SWITCHES |
| 2 | ||
| 8.IN81.2445.121 | Fritz Kuebler Gmbh | INCLINOMETER; 2-DIMENSIONAL; ?45?; 0-5V/10-30V; 1 HZ; M12 |
| 0 | ||
| 05344512001 (344512) | Wera Werk Hermann Werner GmbH & Co. KG | 780 B/2 S ADAPTER |
| 0 | ||
| 8.M3681.6444.4512-C | Fritz Kuebler Gmbh | ABSOLUTE; SPRING ELEMENT; 10MM BORE; 0-10V/15-30V; RADIAL M12; SCALABLE |
| 0 | ||
| 93445-1202 (934451202) | Molex | CONN;RECT;PLUG HSG;2 POS;SEALED;ML-XT SER;LARGE REAR SEAL W/COVER;GRAY |
| 0 | ||
| 93445-1201 (934451201) | Molex | CONN RECT PLUG HSG 2 POS SEALED ML-XT SERIES W/LARGE REAR SEAL/COVER BLACK 13A |
| 0 | ||
| SCB-BL00 (445120400) | OMRON Industrial Automation | SCB-BL00 |
| 0 | ||
| SB12-ALED10 (445120510) | OMRON Industrial Automation | SB12-ALED10 |
| 0 | ||
| BA1-B0-44-480-C22-D (BA1B044512121D | BA1-B0-44-512-121-D | BA1B044512121D) | Carling Technologies | CIRCUIT BREAKER, B-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| BA4-B0-24-630-C21-D (BA4B026445121D | BA4-B0-26-445-121-D | BA4B026445121D) | Carling Technologies | CIRCUIT BREAKER, B-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| BA4-B0-22-615-211-D (BA4B024445121D | BA4-B0-24-445-121-D | BA4B024445121D) | Carling Technologies | CIRCUIT BREAKER, B-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| BA1-B0-44-512-121-D (BA1B044610121D | BA1-B0-44-610-121-D | BA1B044610121D) | Carling Technologies | CIRCUIT BREAKER, B-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
| MM2-B-34-445-1-2DB-B-C (MM2B3444512DBBC|MM2-B-34-445-1-2DB-B-C|MM2B3444512DBBC) | Carling Technologies | CIRCUIT BREAKER, M-SERIES, HYDRAULIC-MAGNETIC |
| 0 | ||
![]() Rochester Electronics | MACH445-12YC![]() | Lattice Semiconductor Corporation | EE PLD, 12ns, 128-Cell, CMOS, PQFP100 RoHS : Not Compliant |
| 123 | |
![]() Sager | 44512-0410 | OMRON Electronic Components | Mounting Hardware SC12-M2010 |
| 5 | |
| FW-50-05-F-D-445-125-A | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Micro Board Stacking Header, 0.050 Pitch RoHS : Compliant |
| 0 | ||
| BA4-B0-26-445-121-D | Carling Technologies | Circuit Breakers BA4B026445121D RoHS : Compliant |
| 0 | ||
| 0634451221 | Molex | Punches & Dies ANVIL |
| 0 | ||
| 4-644512-7 | TE Connectivity | Headers & Wire Housings 17P MTA100 CONN ASSY TAPE LF RoHS : Compliant | 0 | |||
| 3-644512-4 | TE Connectivity | Headers & Wire Housings 04P MTA100 CONN ASSY RoHS : Compliant |
| 0 | ||
| 0634451217 | Molex | Punches & Dies ANVIL RoHS : Compliant |
| 0 | ||
| 4-644512-9 | TE Connectivity | Headers & Wire Housings 19P MTA100 CONN ASSY TAPE LF RoHS : Compliant | 0 | |||
| ELL3445-1218X418-G | ABB Group | CDT-33 ELL3/445-12 1/8X4 1/8-G |
| 0 | ||
| 5-644512-5 | TE Connectivity | Headers & Wire Housings 25P MTA100 CONN ASSY TAPE LF RoHS : Compliant | 0 | |||
| 44512-0600 | OMRON Electronic Components | Basic / Snap Action Switches SC12-5M00 |
| 0 | ||
| 44512-3030 | OMRON Electronic Components | Basic / Snap Action Switches UNIVERSAL MOUNTING BRACKET FOR TONGUE AND HINGE PIN INTERLOCK SWI | 0 | |||
| TW-10-06-F-D-445-120 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| ZW-20-10-L-D-445-120 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| FW-40-04-L-D-445-120 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Micro Board Stacking Header, 0.050 Pitch RoHS : Compliant |
| 0 | ||
![]() TME | 3-644512-4 | TE Connectivity | Connector: wire-board; contact; female; data; Inom: 5A; 250V; PIN: 4 RoHS : Compliant |
| 6,600 | |
| 934451204 | TE Connectivity | Connector: wire-wire RoHS : Compliant |
| 973 | ||
| 93445-1204 | Molex | Connector: automotive; plug; female; 13A; PIN: 2; IP68; straight |
| 939 | ||
| 934451202 | TE Connectivity | Connector: wire-wire RoHS : Compliant |
| 908 | ||
| 93445-1203 | Molex | Connector: automotive; plug; female; 13A; PIN: 2; IP68; straight |
| 879 | ||
| 2344512-1 | TE Connectivity | Cable-panel; male,female; PIN: 2; straight; for panel mounting RoHS : Compliant |
| 431 | ||
| 03445120 | GSR | Drill bit; for metal; Ø: 12mm; L: 151mm; Working part len: 101mm |
| 0 | ||
| 03445121 | GSR | Drill bit; for metal; Ø: 12.1mm; L: 151mm; Working part len: 101mm |
| 0 | ||
| 03445122 | GSR | Drill bit; for metal; Ø: 12.2mm; L: 151mm; Working part len: 101mm |
| 0 | ||
| 63445-1213 | Molex | Anvil |
| 0 | ||
| 03445126 | GSR | Drill bit; for metal; Ø: 12.6mm; L: 151mm; Working part len: 101mm |
| 0 | ||
| 03445127 | GSR | Drill bit; for metal; Ø: 12.7mm; L: 151mm; Working part len: 101mm |
| 0 | ||
| 44512 | ProLinear/PONTECH Inc | Cutting wheel; Ø: 125mm; Disc thick: 3mm; stone; 22mm |
| 0 | ||
| 03445125 | GSR | Drill bit; for metal; Ø: 12.5mm; L: 151mm; Working part len: 101mm |
| 0 | ||
| 09140044512 | HARTING Technology Group | Connector: HDC; module; female; 50V; PIN: 4; UL94V-0; -40÷125°C RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | SCC68692E1A44,512![]() | NXP Semiconductors | IC DUART 1MBPS 44PLCC RoHS : Compliant | 1,704 | ||
![]() ComSIT USA | 9140044512 | HARTING Technology Group | Heavy Duty Connector Inserts Module without Contacts Female RoHS : Compliant | 214 | ||
| SCC68692C1A44512 | NXP Semiconductors | DUAL ASYNCHRONOUS RECEIVER/TRANSMITTER RoHS : Not Compliant | 160 | |||
| SCC68681C1A44512 | NXP Semiconductors | Dual Universal Asynchronous Receiver/Transmitter (DUART), NXP RoHS : Compliant | 16 | |||
| SCC2681AC1A44512 | NXP Semiconductors | UART interface IC, NXP, DIP package RoHS : Not Compliant | 3 | |||
![]() Interstate Connecting Components | 93445-1209 | Molex | CONN,PLUG,2P,ML-XT,RED ASMBLD,LG RR SEAL & COVER |
| 2 | |
| 3-644512-4 | TE Connectivity | 04P MTA100 CONN ASSY TAPE LF RoHS : Compliant |
| 0 | ||
| MS90556C44512P | Amphenol Aerospace | 22992 STR PLG PIN | 0 | |||
| CL90557C44512S | Amphenol Aerospace | 22992 CLASS L RECPT 4#2 SKT | 0 | |||
| MS90558C44512P | Amphenol Aerospace | 22992 CLASS L WLL MNT RCP PIN | 0 | |||
| 3-2344512-1 | TE Connectivity | 2POS,21MM,HEADER HSG,ASSY RoHS : Compliant | 0 | |||
| CL90558C44512P | Amphenol Aerospace | COMMERCIAL CLASS L CONNECTOR PLUG | 0 | |||
| MS90555C44512S | Amphenol Aerospace | 22992 CLASS L SKT CONN | 0 | |||
| 3-644512-5 | TE Connectivity | 05P MTA100 CONN ASSY TAPE LF RoHS : Compliant |
| 0 | ||
| MS90557C44512S | Amphenol Aerospace | 22992 WLL MNT RCP SKT CAD GLD PLT | 0 | |||
| 10132445-12LF | Amphenol FCi | 10132445-12LF-MINITEK PWR3.0 H RoHS : Unknown |
| 0 | ||
| 3-644512-2 | TE Connectivity | 02P MTA100 CONN ASSY TAPE LF RoHS : Compliant |
| 0 | ||
| G8445-12NF | Glenair Inc | Quetschnmutter | 0 | |||
| 2344512-1 | TE Connectivity | 2POS,HVP2100,180DEG,HEADER,COD RoHS : Compliant | 0 | |||
| 1-2344512-1 | TE Connectivity | 2POS,21MM,HEADER HSG,ASSY RoHS : Compliant | 0 | |||
![]() PEI Genesis | CE9445-1222 | ITT Interconnect Solutions |
| 0 | ||
| CE9445-1205 | ITT Interconnect Solutions |
| 0 | |||
| CE9445-1216 | ITT Interconnect Solutions |
| 0 | |||
| CE9445-1211 | ITT Interconnect Solutions |
| 0 | |||
| CE9445-1293 | ITT Interconnect Solutions |
| 0 | |||
| CE9445-1208 | ITT Interconnect Solutions |
| 0 | |||
| MS90556C44512P | Amphenol Corporation |
| 0 | |||
| CE9445-1223 | ITT Interconnect Solutions |
| 0 | |||
| MS90558C44512P | Amphenol Corporation |
| 0 | |||
| CE9445-1210 | ITT Interconnect Solutions |
| 0 | |||
| CE9445-1292 | ITT Interconnect Solutions |
| 0 | |||
| CE9445-1213 | ITT Interconnect Solutions |
| 0 | |||
| CL90555C44512S | Amphenol Corporation |
| 0 | |||
| CL90558C44512P | Amphenol Corporation |
| 0 | |||
| CE9445-1212 | ITT Interconnect Solutions |
| 0 | |||
![]() Chip 1 Exchange | 445-1281-6-ND | TDK Corporation | INSTOCK | 437 | ||
| R445120480 | INSTOCK | 67 | ||||
![]() Avnet Abacus | 634451212 | Molex | ANVIL (Alt: 634451212) RoHS : Compliant | 0 | ||
| 387044512 | Molex | SR BTS PC CS 12 ASY (Alt: 387044512) RoHS : Compliant | 0 | |||
| 934445121 | Molex | Conn Housing RCP 8 POS ST Cable Mount Bag (Alt: 934445121) RoHS : Compliant | 0 | |||
| 934451202 | Molex | Conn Housing PL 2 POS ST Cable Mount Bag (Alt: 934451202) RoHS : Compliant | 0 | |||
| 934451202 | Molex | Conn Housing PL 2 POS ST Cable Mount Bag (Alt: 934451202) RoHS : Compliant | 0 | |||
| 934451206 | Molex | 2CCT MLXT PLUG WHITE W LARGE SEAL ASSY (Alt: 934451206) RoHS : Compliant | 0 | |||
| 934451201 | Molex | Conn Housing PL 2 POS ST Cable Mount Bag (Alt: 934451201) RoHS : Compliant | 0 | |||
| 934451201 | TE Connectivity | Conn Housing Sealed Housing PL 2POS 55mm Straight Cable Mount (Alt: 934451201) RoHS : Compliant | 0 | |||
| 3-644512-4 | TE Connectivity | Conn IDC Connector F 4 POS 254mm IDT RA Cable Mount TR (Alt: 3-644512-4) RoHS : Compliant | 0 | |||
| 3-644512-4 | TE Connectivity | Conn IDC Connector F 4 POS 254mm IDT RA Cable Mount TR (Alt: 3-644512-4) RoHS : Compliant | 0 | |||
| 3-644512-3 | TE Connectivity | Conn IDC Connector F 3 POS 254mm IDT RA Cable Mount TR (Alt: 3-644512-3) RoHS : Compliant | 0 | |||
| 3-644512-5 | TE Connectivity | Conn IDC Connector F 5 POS 254mm IDT RA Cable Mount TR (Alt: 3-644512-5) RoHS : Compliant | 0 | |||
| 3-644512-5 | TE Connectivity | Conn IDC Connector F 5 POS 254mm IDT RA Cable Mount TR (Alt: 3-644512-5) RoHS : Compliant | 0 | |||
| BFC237445123 | Vishay Intertechnologies | VISBFC237445123 (Alt: BFC237445123) RoHS : Compliant | 0 | |||
| 10132445-12LF | Amphenol Corporation | (Alt: 10132445-12LF) RoHS : Compliant | 0 | |||
![]() Master Electronics | FW-50-05-F-D-445-125-A | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | |
| BA4-B0-26-445-121-D | Carling Technologies | Hydraulic-magnetic circuit breaker with handle actuator 4-pole configuration series trip AC long delay 4.5A current rating and screw terminal with upturned lugs. RoHS : Compliant |
| 0 | ||
| 445120190 | OMRON Industrial Automation | SL12-CB220 RoHS : Compliant |
| 0 | ||
| 3-644512-4 | TE Connectivity | 04P MTA100 CONN ASSY TAPE LF RoHS : Compliant |
| 0 | ||
| ELL3445-1218X418-G | Thomas & Betts | CDT-33 ELL3/445-12 1/8X4 1 RoHS : Compliant |
| 0 | ||
| 445120420 | OMRON Industrial Automation | SL12-RCL20 RoHS : Compliant |
| 0 | ||
| 445120610 | OMRON Industrial Automation | SC12-10M10 RoHS : Compliant |
| 0 | ||
| 445122311 | OMRON Industrial Automation | SCB-ID31 RoHS : Compliant |
| 0 | ||
| A2445.12 | American Electrical Inc | Pressure balance element Nylon Black M12x1.5.. RoHS : Compliant |
| 0 | ||
| TW-10-06-F-D-445-120 | Samtec Inc | Conn Board Stacker HDR 20 POS 2mm Solder ST Through Hole RoHS : Compliant |
| 0 | ||
| ZW-20-10-L-D-445-120 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-40-04-L-D-445-120 | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Through-hole RoHS : Compliant |
| 0 | ||
| 934451204 | TE Connectivity | 2CCT BLUE PLUG W/LARGE SEAL RoHS : Compliant |
| 0 | ||
| FW-40-05-F-D-445-125-A-TR | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| ZW-13-12-G-D-445-125 | Samtec Inc | Conn Board Stacker HDR 26 POS 2.54mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W11445-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male Right Angle to SMA Male Right Angle Low Loss Cable 12 Inch Length Using LMR-195 Coax., Radio frequency assembly N male right angle to SMA male right angle low loss cable 12 inch length using LMR-195 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to SMA male right angle low loss cable 12 inch length using LMR-195 coax, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle N type to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W11445-12 can also be known as a low loss right angle type N plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. Type N plug to SMA plug cable assembly PE3W11445-12 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency type N right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W11445-12 can also be used in the other direction and will be right angle SMA male to right angle type N male cable assembly if the opposite connectivity is required. Low loss N type right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to SMA male right angle low loss cable 12 inch length using LMR-195 coax. |
| 1,555 | |
| PE33445-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm, Length: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Female Cable 12 Inch Length Using 75 Ohm RG187 Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC female cable 12 inch length using 75 Ohm RG187 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm BNC male to 75 Ohm BNC female cable 12 inch length using 75 Ohm RG187 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and female on end 2. This BNC to BNC cable is a male to female coax assembly, PE33445-12, can also be known as a BNC plug to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC jack cable assembly PE33445-12 is built with RG187 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency BNC male to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33445-12 can also be used in the other direction and will be BNC female to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC female cable 12 inch length using 75 Ohm RG187 coax. |
| 171 | ||
| PE3C4451-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male to SSMC Plug Cable 24 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly N male to SSMC plug cable 24 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to SSMC plug cable 24 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with N type cable connection on one end and SSMC cable connection on the other. Our type N to SSMC cable assemblies have a male gender on end 1 and plug on end 2. This type N to SSMC cable is a male to plug coax assembly, PE3C4451-24, can also be known as a N type plug to SSMC male cable assembly and will be shipped same-day as it is purchased. Type N plug to SSMC male cable assembly PE3C4451-24 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable N cable assembly is manufactured with N type to SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 11 GHz maximum frequency type N male to SSMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4451-24 can also be used in the other direction and will be SSMC plug to type N male cable assembly if the opposite connectivity is required. N type plug to SSMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SSMC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SSMC plug cable 24 inch length using PE-SR405FLJ coax. |
| 106 | ||
| PE3C6445-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-375, RF Cable Type: SPF-375, RF Cable Impedance: 50 Ohm, Length: 12 inches. Fire Rated 4.3-10 Male to 4.3-10 Male Low PIM Cable 12 Inch Length Using SPF-375 Coax Using Times Microwave Parts., Radio frequency assembly fire rated 4.3-10 male to 4.3-10 male low PIM cable 12 inch length using SPF-375 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated 4.3-10 male to 4.3-10 male low PIM cable 12 inch length using SPF-375 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-375-4310M-LP 4.3-10 to TC-375-4310M-LP 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-375-4310M-LP 4.3-10 cable connection on one end and TC-375-4310M-LP 4.3-10 cable connection on the other. Our low PIM TC-375-4310M-LP 4.3-10 to TC-375-4310M-LP 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This TC-375-4310M-LP 4.3-10 to TC-375-4310M-LP 4.3-10 cable is a male to male coax assembly, PE3C6445-12, can also be known as a low PIM TC-375-4310M-LP 4.3-10 plug to TC-375-4310M-LP 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. TC-375-4310M-LP 4.3-10 plug to TC-375-4310M-LP 4.3-10 plug cable assembly PE3C6445-12 is built with SPF-375 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-375-4310M-LP 4.3-10 cable assembly is manufactured with TC-375-4310M-LP 4.3-10 to TC-375-4310M-LP 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM TC-375-4310M-LP 4.3-10 male to TC-375-4310M-LP 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-375-4310M-LP 4.3-10 plug to TC-375-4310M-LP 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-375-4310M-LP 4.3-10 to TC-375-4310M-LP 4.3-10 cable assembly for quick shipment worldwide. Variations of TC-375-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated 4.3-10 male to 4.3-10 male low PIM cable 12 inch length using SPF-375 coax using Times Microwave parts. |
| 43 | ||
| PE3MP2445-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. TRB 3-Lug Bulkhead Non-Insulated Jack with Blunt Cut for 78 Ohm M17/176-00002, 12" Cable., Radio frequency assembly TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB bulkhead cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MP2445-12 can also be known as a 1553 TRB female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB female to blunt cut genderless cable assembly PE3MP2445-12 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB jack bulkhead to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MP2445-12 can also be used in the other direction and will be blunt cut genderless to TRB jack bulkhead cable assembly if the opposite connectivity is required. 1553 TRB female bulkhead to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to blunt cut cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Lug bulkhead non-insulated jack with blunt cut for 78 Ohm M17/176-00002, 12" cable. |
| 42 | ||
| PE3MSA00445-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: M17/176-00002, RF Cable Type: M17/176-00002, RF Cable Impedance: 78 Ohm, Length, Max: 12 inches. Lead Free Bend Relief 3-Slot TRB Plug to Bend Relief 3-Lug TRB Bulkhead Insulated Jack for 78 Ohm M17/176-00002, 12" Cable., Radio frequency assembly lead free bend relief 3-Slot TRB plug to bend relief 3-Lug TRB bulkhead insulated jack for 78 Ohm M17/176-00002, 12" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free bend relief 3-Slot TRB plug to bend relief 3-Lug TRB bulkhead insulated jack for 78 Ohm M17/176-00002, 12" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB bulkhead cable connection on the other. Our 1553 TRB to TRB cable assemblies have a plug gender on end 1 and jack on end 2. PE3MSA00445-12 can also be known as a 1553 TRB male to TRB female cable assembly and will be shipped same-day as it is purchased. TRB male to TRB female cable assembly PE3MSA00445-12 is built with M17/176-00002 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 10 MHz maximum frequency TRB plug to TRB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00445-12 can also be used in the other direction and will be TRB jack bulkhead to TRB plug cable assembly if the opposite connectivity is required. 1553 TRB male to TRB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free bend relief 3-Slot TRB plug to bend relief 3-Lug TRB bulkhead insulated jack for 78 Ohm M17/176-00002, 12" cable. |
| 8 | ||
| PE3C10445-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Passivated, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.85mm Female to 1.85mm Female Cable 12 Inch Length Using RG405 Semi-Rigid Coax., Radio frequency assembly 1.85mm female to 1.85mm female cable 12 inch length using RG405 semi-rigid coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm female to 1.85mm female cable 12 inch length using RG405 semi-rigid coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 1.85mm cable connection on the other. Our 1.85mm to 1.85mm cable assembly has a female gender on end 1 and a female on end 2. PE3C10445-12 can also be known as a 1.85mm jack to 1.85mm jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.05-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. This radio frequency cable assembly can withstand temperatures ranging from -55 to 100 degrees C. The semi-rigid RF cable has an in-series connection. Our 1.85mm female to 1.85mm female cable has a maximum VSWR of 1.4:1. 1.85mm jack to 1.85mm jack cable assembly PE3C10445-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid 1.85mm cable assembly is manufactured with 1.85mm to 1.85mm cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/solder attachment method and a stainless steel body with passivated plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. 1.85mm jack to 1.85mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 1.85mm cable assembly for quick shipment worldwide. Variations of 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 1.85mm RF cable assembly as per your requirements. |
| 5 | ||
| PE3M0445-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMPS, Connector 1 Size: 16, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMPS, Connector 2 Size: 16, Connector 2 Gender: Socket, Connector 2 Specification: MIL-DTL-38999, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, RF Cable Part Number: PE-SR047FL, RF Cable Type: Coax, RF Cable Specification: PE-SR047FL datasheet, RF Cable Impedance : 50 Ohm. SMPS Size 16 Contact Pin to SMPS Size 16 Contact Socket Cable 12 Inch Length Using PE-SR047FL Coax with Heat Shrink, LF Solder. The PE3M0445-12 from Pasternack is a D38999 contact cable assembly that is built with a size 16 SMPS pin contact connection on one end and a SMPS socket connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This SMPS to SMPS cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 20 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 100 degrees C. Our SMPS pin to SMPS socket cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0445-12 in-series RF cable has dB of minimum RF shielding. SMPS pin to SMPS socket cable assembly is built with PE-SR047FL, which is a formable coax type. The Pasternack PE3M0445-12 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this SMPS to SMPS RF cable are available on our downloadable PDF datasheet. SMPS pin to SMPS socket cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of SMPS cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMPS to SMPS RF cable assembly as per your requirements. |
| 5 | ||
| PE44512 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: QMA, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: None, Interface Type 1: Thru Hole. QMA Female Connector Solder Attachment Thru Hole PCB. PE44512 QMA female pcb connector has an interface type of thru hole and a 50 Ohm impedance. Pasternack QMA female connector uses shield/contact solder as an attachment method. The Pasternack QMA female pcb connector has a PTFE dielectric type. The Pasternack QMA pcb connector has a brass body with gold plating. This QMA female pcb RF connector is RoHS and REACH compliant. This Pasternack female QMA connector will ship the same day as purchased. Our QMA female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom QMA connector cable assemblies that will ship the same day as well. |
| 1 | ||
| PE3445-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG402/U, RF Cable Type: RG402, RF Cable Impedance: 50 Ohm, Length: 12 inches. BNC Male to BNC Male Cable 12 Inch Length Using RG402 Coax., Radio frequency assembly BNC male to BNC male cable 12 inch length using RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male cable 12 inch length using RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3445-12, can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3445-12 is built with RG402 which is a semi-rigid coax type. The Pasternack semi-rigid BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 12 inch length using RG402 coax. |
| 0 | ||
| PE3W05445-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Female to N Female Low Loss Cable 12 Inch Length Using LMR-600-DB Coax., Radio frequency assembly N female to N female low loss cable 12 inch length using LMR-600-DB coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female to N female low loss cable 12 inch length using LMR-600-DB coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a female gender on end 1 and female on end 2. PE3W05445-12 can also be known as a low loss N type jack to type N jack cable assembly and will be shipped same-day as it is purchased. Type N jack to type N jack cable assembly PE3W05445-12 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N female to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N jack to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to N female low loss cable 12 inch length using LMR-600-DB coax. |
| 0 | ||
| PE3C8445-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male Right Angle to SMA Female Bulkhead Low Loss Cable 12 Inch Length Using PE-C100-LSZH Coax., Radio frequency assembly SMA male right angle to SMA female bulkhead low loss cable 12 inch length using PE-C100-LSZH coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA female bulkhead low loss cable 12 inch length using PE-C100-LSZH coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a SMA bulkhead cable connection on the other. Our low loss right angle SMA to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3C8445-12 can also be known as a low loss right angle SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C8445-12 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to bulkhead SMA female cable has a maximum VSWR of 1.4:1. SMA plug to SMA jack cable assembly PE3C8445-12 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C8445-12 can also be used in the other direction and will be a SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. |
| 0 | ||
| PE3C4445-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SSMC Jack Bulkhead Cable 12 Inch Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA male to SSMC jack bulkhead cable 12 inch length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SSMC jack bulkhead cable 12 inch length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SSMC bulkhead cable connection on the other. Our SMA to SSMC cable assemblies have a male gender on end 1 and jack on end 2. This SMA to SSMC cable is a male to jack coax assembly, PE3C4445-12, can also be known as a SMA plug to SSMC female cable assembly and will be shipped same-day as it is purchased. SMA plug to SSMC female cable assembly PE3C4445-12 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA male to SSMC jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4445-12 can also be used in the other direction and will be SSMC jack bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SSMC female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SSMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SSMC jack bulkhead cable 12 inch length using PE-SR405FLJ coax. |
| 0 | ||
![]() Vyrian | SCC2692AE1A44,512![]() | NXP Semiconductors | Serial I/O Controller, 2 Channel(s), 0.125MBps, CMOS, PQCC44 RoHS : Compliant | 13,238 | ||
SC16C2550BIA44,512![]() | NXP Semiconductors | Serial I/O Controller, 2 Channel(s), 0.625MBps, CMOS, PQCC44 RoHS : Compliant | 10,445 | |||
SCC2681TC1A44,512![]() | NXP Semiconductors | Serial I/O Controller, 2 Channel(s), 0.125MBps, CMOS, PQCC44 RoHS : Compliant | 9,530 | |||
SC16C550IA44,512![]() | NXP Semiconductors | Serial I/O Controller, 1 Channel(s), 0.375MBps, CMOS, PQCC44 RoHS : Compliant | 9,145 | |||
SC16C750BIA44,512![]() | NXP Semiconductors | Serial I/O Controller, 1 Channel(s), 0.375MBps, CMOS, PQCC44 RoHS : Compliant | 7,623 | |||
SC16C650AIA44,512![]() | NXP Semiconductors | Serial I/O Controller, 1 Channel(s), 0.375MBps, CMOS, PQCC44 RoHS : Compliant | 7,484 | |||
SC16C2550IA44,512![]() | NXP Semiconductors | Serial I/O Controller, 2 Channel(s), 0.625MBps, CMOS, PQCC44 RoHS : Compliant | 7,262 | |||
SC16C550BIA44,512![]() | NXP Semiconductors | Serial I/O Controller, 1 Channel(s), 0.375MBps, CMOS, PQCC44 RoHS : Compliant | 6,616 | |||
SC16C750IA44,512![]() | NXP Semiconductors | Serial I/O Controller, 1 Channel(s), 0.375MBps, CMOS, PQCC44 RoHS : Compliant | 6,613 | |||
SCC2681AC1A44,512![]() | NXP Semiconductors | Serial I/O Controller, 2 Channel(s), 0.125MBps, CMOS, PQCC44 RoHS : Compliant | 6,575 | |||
SC16C2552BIA44,512![]() | NXP Semiconductors | Serial I/O Controller, 2 Channel(s), 0.625MBps, CMOS, PQCC44 RoHS : Compliant | 5,687 | |||
SC16C650BIA44,512![]() | NXP Semiconductors | Serial I/O Controller, 1 Channel(s), 0.375MBps, CMOS, PQCC44 RoHS : Compliant | 5,245 | |||
SCC2681AE1A44,512![]() | NXP Semiconductors | Serial I/O Controller, 2 Channel(s), 0.125MBps, CMOS, PQCC44 RoHS : Compliant | 4,730 | |||
SCC68681C1A44,512![]() | NXP Semiconductors | Serial I/O Controller, 2 Channel(s), 0.125MBps, CMOS, PQCC44 RoHS : Compliant | 4,428 | |||
SCC2692AC1A44,512![]() | NXP Semiconductors | Serial I/O Controller, 2 Channel(s), 0.125MBps, CMOS, PQCC44 RoHS : Compliant | 533 |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |