PIC16F883-ESLASHML datasheet(137/288 Pages) MICROCHIP

137 / 288 page

Preliminary

DS41291D-page 135

PIC16F882/883/884/886/887

11.6.1

HALF-BRIDGE MODE

In Half-Bridge mode, two pins are used as outputs to

drive push-pull loads. The PWM output signal is output

on the CCPx/P1A pin, while the complementary PWM

output

signal

output

the

P1B

(see

Figure 11-9). This mode can be used for Half-Bridge

applications, as shown in Figure 11-9, or for Full-Bridge

applications, where four power switches are being

modulated with two PWM signals.

In Half-Bridge mode, the programmable dead-band delay

can be used to prevent shoot-through current in

Half-Bridge power devices. The value of the PDC<6:0>

bits of the PWM1CON register sets the number of

instruction cycles before the output is driven active. If the

value is greater than the duty cycle, the corresponding

output remains inactive during the entire cycle. See

Section 11.6.6 “Programmable Dead-Band Delay

Mode” for more details of the dead-band delay

operations.

Since the P1A and P1B outputs are multiplexed with

the PORT data latches, the associated TRIS bits must

be cleared to configure P1A and P1B as outputs.

FIGURE 11-8:

EXAMPLE OF

HALF-BRIDGE PWM

OUTPUT

FIGURE 11-9:

EXAMPLE OF HALF-BRIDGE APPLICATIONS

Period

Pulse Width

(1)

P1A(2)

P1B(2)

td = Dead-Band Delay

Period

(1)

Note 1:

At this time, the TMR2 register is equal to the

PR2 register.

Output signals are shown as active-high.

P1A

P1B

FET

Driver

FET

Driver

Load

FET

Driver

FET

Driver

V+

Load

FET

Driver

FET

Driver

P1A

P1B

Standard Half-Bridge Circuit (“Push-Pull”)

Half-Bridge Output Driving a Full-Bridge Circuit

PIC16F883-E/ML Datasheet(PDF) 137 Page - Microchip Technology

PIC16F883-E/ML Datasheet(HTML) 137 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL