DM300018 datasheet(110/115 Pages) MICROCHIP

Part #	DM300018

Description	dsPICDEM??2 Development Board User?셲 Guide

PDF	115 Pages

Scroll/Zoom	100%

Manufacturer	MICROCHIP [Microchip Technology]

Direct Link	http://www.microchip.com

Logo

110 / 115 page

dsPICDEM 2 Development Board User’s Guide

DS51558A-page 104

Advance Information

B.4

LCD FIRMWARE PROGRAMMING:

The LCD firmware resident on the dsPIC30F2011 device may be reprogrammed at any

time using the MPLAB IDE project and workspace provided in this folder.

In order to reprogram the firmware, the following steps need to be performed in

sequence:

All switches on blocks S2, S3, and S4 should be turned OFF.

All jumpers on header H1 should be removed.

Install jumpers on header H11.

Connect MPLAB ICD 2 Programming Header to the dsPICDEM 2 Development

Board at J1.

Install jumpers JP1 and JP2 and supply power to the board at J4.

Open the MPLAB IDE workspace from the folder:

path/dsPICDEM 3 Development Kit/LCD Controller/

Build the project.

Project>>Build All

Download the hex file into the dsPIC30F2011 device.

Programmer>>Program

Remove jumpers from headee H11.

DM300018 Datasheet(PDF) 110 Page - Microchip Technology