The **06GENW3ES/-R** is a high-performance, medical-grade **AC Power Entry Module** (PEM) manufactured by Delta Electronics. This component is an integrated unit designed to manage the input power of electronic devices, combining several functions into a single housing. ### 1. Key Technical Specifications | Feature | Specification | | :--- | :--- | | **Rated Voltage** | 115/250 VAC | | **Rated Current** | 6 Amps | | **Operating Frequency** | 50/60 Hz | | **Leakage Current** | Very Low (Medical Grade, typically < 2μA @ 115V) | | **Termination Style** | Wire Leads (indicated by the 'W') | | **Mounting Type** | Screw Mount (Flange) | | **Safety Approvals** | UL, CSA, VDE | --- ### 2. Integrated Components The "3-in-1" nature of this part means it contains three distinct electronic sub-assemblies: 1. **IEC 60320-1 C14 Inlet**: The standardized male socket that accepts a typical power cord. 2. **RFI/EMI Filter**: An internal LC circuit (inductors and capacitors) designed to suppress electromagnetic interference. The **"ES"** designation often refers to an enhanced stage or specific filter configuration for higher noise attenuation. 3. **Fuse Holder**: A compartment for a 5x20mm fuse (often double-fused for medical safety) to protect the device from overcurrent. --- ### 3. Part Number Suffix Breakdown * **06**: Represents the current rating (6 Amperes). * **GE**: Series designation for Delta's power entry modules. * **N**: Neutral/Standard configuration. * **W**: **Wire Leads**. Instead of solder tabs or fast-on terminals, this version has pre-attached insulated wires for internal connection. * **3**: Specific physical housing style or circuit type. * **ES**: Enhanced performance filter, often with low-leakage characteristics for medical equipment. * **-R**: Indicates compliance with **RoHS** (Restriction of Hazardous Substances) standards. --- ### 4. Typical Applications Due to its low leakage current and high suppression capabilities, this part is commonly found in: * **Medical Equipment**: Dialysis machines, monitors, and diagnostic tools (where patient safety requires minimal leakage). * **Precision Test Instruments**: Where electrical noise could interfere with sensitive measurements. * **Industrial Controls**: To protect internal logic boards from power line spikes.