The **10PE-1B0-R** is a specific part number typically associated with **RJ45 Jack Connectors** integrated with magnetics (also known as **MagJacks**). These components are essential in networking hardware, combining the physical connector with the necessary circuitry for signal conditioning and isolation. --- ### 1. Technical Specifications Below are the general technical parameters typical for this class of component: | Feature | Specification | | :--- | :--- | | **Component Type** | RJ45 Connector with Integrated Magnetics | | **Port Configuration** | Single Port (1x1) | | **Speed/Standard** | 10/100 Base-TX (Fast Ethernet) | | **Orientation** | Right Angle (Tab Down or Tab Up depending on specific PCB layout) | | **LEDs** | Often includes Green/Yellow LEDs for link/activity status | | **Shielding** | Metal EMI Shield with grounding tabs | | **Isolation Voltage** | Typically 1,500 Vrms | --- ### 2. Internal Components (The Magnetics) The "Integrated Magnetics" inside the 10PE-1B0-R usually consist of three main parts: 1. **Isolation Transformer:** Protects the sensitive Ethernet PHY chip from external electrical surges and high voltages on the network cable. 2. **Common Mode Choke:** Filters out electromagnetic interference (EMI) and noise to ensure signal integrity. 3. **Bob Smith Termination:** A resistor/capacitor network used to reduce common-mode noise and match impedance. --- ### 3. Pinout and Mechanical Design The part is designed for **Through-Hole Technology (THT)** mounting on a Printed Circuit Board (PCB). * **Signal Pins:** 8 pins for the Ethernet data lines. * **LED Pins:** 4 pins (usually) to power the integrated status lights. * **Shield Tabs:** Solder points that connect the metal casing to the chassis ground for EMI protection. --- ### 4. Applications This part is commonly found in: * **Network Switches/Routers:** Low-power consumer networking gear. * **Industrial PCs:** Providing a ruggedized Ethernet interface. * **IoT Gateways:** Connecting smart devices to a local area network. * **Embedded Systems:** Single-board computers (SBCs) that require a compact Ethernet port. --- ### 5. Equivalent Manufacturers While "10PE-1B0-R" is a specific manufacturer's code (often associated with brands like **UDE** or similar specialized magnetic connector manufacturers), equivalent parts can be found from: * **Pulse Electronics** * **TE Connectivity** * **Bel Fuse (MagJack series)** * **Wurth Elektronik**