The **10VK-GD6-R** is a high-performance **RFI/EMI Power Line Filter** manufactured by TE Connectivity (specifically within the Corcom product line). It is designed to suppress electromagnetic interference on AC power lines. --- ## 1. Technical Specifications Below are the primary technical parameters for the 10VK-GD6-R: | Feature | Specification | | :--- | :--- | | **Current Rating** | 10 Amps | | **Voltage Rating (Max)** | 250 VAC | | **Operating Frequency** | 50/60 Hz | | **Mounting Type** | Flange Mount (Chassis) | | **Termination Style** | Wire Leads (Input/Output) | | **Leakage Current** | 0.5 mA @ 120V 60Hz / 1.0 mA @ 250V 50Hz | | **Series** | VK Series | --- ## 2. Key Internal Components The "10VK" series is categorized as a **dual-stage** filter, meaning it uses multiple internal stages to provide superior attenuation compared to single-stage filters. ### A. Inductors (Chokes) * **Common Mode Chokes:** These use toroidal cores to suppress noise that is common to both the Line and Neutral wires relative to the ground. * **Differential Mode Inductors:** These handle noise that exists between the Line and Neutral lines. ### B. Capacitors * **X-Capacitors:** Connected across the lines (L-N) to suppress differential mode interference. * **Y-Capacitors:** Connected from the lines to the ground (L-G and N-G) to bypass common-mode noise to the earth. --- ## 3. Part Number Breakdown The nomenclature provides specific details about the component's build: * **10**: Indicates the **10 Amp** current capacity. * **VK**: Refers to the **VK Series**, designed for high-impedance loads and providing high-frequency attenuation. * **G**: Represents the **Termination Style** (In this case, it usually signifies specific lead configurations or grounding). * **D6**: Refers to the specific mechanical physical package or internal circuit arrangement. * **R**: Indicates that the part is **RoHS Compliant**. --- ## 4. Typical Applications This filter is commonly used in environments where electronic "noise" could cause equipment malfunction or where the equipment must meet strict EMC (Electromagnetic Compatibility) regulations: 1. **Industrial Machinery:** Protecting PLC and sensitive controllers. 2. **Medical Equipment:** Reducing leakage and interference in diagnostic tools. 3. **Telecommunications:** Cleaning power input for servers and switches. 4. **Switching Power Supplies (SMPS):** Suppressing the high-frequency switching noise generated by the supply itself. ---