The part number **47LAC-260G-R** refers to a high-precision **Thin Film Chip Resistor**, commonly used in automotive, industrial, and telecommunications electronics where stability and reliability are critical. --- ### 1. Component Specifications The following table outlines the technical characteristics typically associated with this specific series and part number: | Parameter | Specification | Description | | :--- | :--- | :--- | | **Component Type** | Thin Film Chip Resistor | High precision surface mount device (SMD) | | **Resistance Value** | 260 Ohms | Indicated by the "260" in the code | | **Tolerance** | ±2% (G) | The "G" suffix denotes a 2% resistance tolerance | | **Package Size** | 0402 or 0603 | Depends on manufacturer series (check datasheet) | | **Temperature Coeff.** | ±25 to ±50 ppm/°C | Low drift over temperature changes | | **RoHS Status** | Compliant (R) | The "R" usually indicates RoHS/Lead-Free compliance | --- ### 2. Key Features * **High Stability:** Thin film technology provides significantly better stability over time and temperature compared to standard thick film resistors. * **Low Noise:** Excellent for signal processing applications because thin film materials produce very little electronic noise. * **Precision Performance:** Used in circuits where the exact resistance value is critical for the accuracy of the device. --- ### 3. Application Areas These resistors are generally found in: 1. **Automotive Electronics:** Control units, sensor interfaces, and navigation systems. 2. **Telecommunications:** Base stations and high-speed networking hardware. 3. **Medical Equipment:** Monitoring devices where signal integrity is paramount. 4. **Test and Measurement:** Precision multimeters and oscillating equipment. --- ### 4. Part Number Breakdown (Typical) * **47L:** Series identifier (often associated with Susumu or similar precision manufacturers). * **AC:** Internal characteristic or casing code. * **260:** The resistance value (260 $\Omega$). * **G:** Tolerance code (G = 2%). * **R:** Packaging/Compliance (Tape & Reel or RoHS compliant).