The **A-FT15-R** is a specific electronic component typically identified as a **flexible flat cable (FFC) connector** or a high-speed interface part, often produced by manufacturers like JAE or similar specialists in interconnect solutions. It is designed for compact electronic assemblies where space is limited. --- ### 1. Technical Specifications The following table outlines the general technical characteristics associated with this part series: | Parameter | Specification | | :--- | :--- | | **Component Type** | FFC/FPC Connector | | **Pitch (Spacing)** | 0.3mm to 0.5mm (Series dependent) | | **Number of Contacts** | 15 Pins | | **Mounting Type** | Surface Mount (SMD/SMT) | | **Orientation** | Right Angle (Horizontal) | | **Contact Material** | Copper Alloy (often Gold-plated) | | **Voltage Rating** | 50V AC/DC | --- ### 2. Key Features * **ZIF/Non-ZIF Mechanism:** Most parts in this category utilize a **Zero Insertion Force (ZIF)** actuator (flip-lock or slider), which ensures the ribbon cable is held securely without damaging the delicate traces. * **Low Profile:** The "A-FT" series is designed for thin devices like smartphones, tablets, and laptops, keeping the height of the connector to a minimum. * **High-Speed Data:** These connectors are engineered to handle high-frequency signals, making them suitable for display interfaces (LVDS/eDP). * **Durability:** Gold plating on the contacts prevents oxidation and ensures stable electrical conductivity over the lifespan of the device. --- ### 3. Common Applications The A-FT15-R is widely used in sectors requiring miniaturization: 1. **Consumer Electronics:** Connecting LCD/OLED screens to motherboards in handheld devices. 2. **Medical Equipment:** Internal wiring for portable diagnostic tools. 3. **Automotive:** Connection points for infotainment head units and dashboard sensors. 4. **Computing:** Linking trackpads, keyboards, or biometric scanners to the main PCB. --- ### 4. Installation & Handling Precautions When working with these electronic parts, observe the following: * **ESD Protection:** Always use an anti-static wrist strap, as the small pitch makes the pins vulnerable to static discharge. * **Actuator Care:** Use a plastic spudger to open the locking flap. Applying too much force with metal tools can snap the plastic hinge. * **Cable Alignment:** Ensure the FFC/FPC cable is inserted perfectly straight to prevent short circuits between the 15 pins.