The part number **A-MCSSP60200-Y-R** typically refers to a **Shielded Twisted Pair (STP) Patch Cable**, specifically within the category of networking components. Below is a detailed breakdown of its electronic and physical specifications. --- ## 1. Component Identification This part is a high-performance network cable designed for data transmission in environments with potential electromagnetic interference (EMI). | Feature | Specification | | :--- | :--- | | **Category** | Cat6 (Category 6) | | **Connector Type** | RJ45 (8P8C) | | **Shielding** | S/FTP or SFTP (Shielded & Foiled Twisted Pair) | | **Length** | 20.0 Meters (indicated by '200') | | **Color** | Yellow (indicated by 'Y') | | **Compliance** | RoHS Compliant (indicated by 'R') | --- ## 2. Technical Specifications The "Electronic Parts" of this assembly include the copper conductors, the gold-plated contacts, and the shielding layers. ### Conductors and Wiring * **Wire Gauge:** Usually **26 AWG** or **27 AWG** stranded copper. Stranded copper is used to ensure flexibility for patch cords. * **Wiring Scheme:** Follows the **T568B** or **T568A** standard (typically T568B for commercial use). * **Frequency Support:** Rated for up to **250 MHz**, supporting speeds up to **1 Gbps (1000Base-T)**. ### Shielding Architecture The "S/FTP" designation means the cable has multiple layers of electronic protection: 1. **Individual Foil Shield:** Each of the 4 twisted pairs is wrapped in aluminum foil to prevent "Crosstalk" between pairs. 2. **Overall Braid Shield:** A tinned copper braid surrounds all pairs together to protect the signal from external EMI/RFI. ### Connectivity (RJ45 Plug) * **Contacts:** Phosphor Bronze base. * **Plating:** 50-micron Gold plating on the contact pins to prevent oxidation and ensure low electrical resistance over time. * **Housing:** Polycarbonate (UL94V-2 rated) with a metal shell for continuous shielding ground. --- ## 3. Physical & Environmental Attributes * **Jacket Material:** PVC or LSZH (Low Smoke Zero Halogen). * **Strain Relief:** Molded "Snagless" boot to protect the RJ45 clip and ensure the minimum bend radius is maintained, preventing signal degradation. ---