ADM7160ACPZN2.5-R7
AI

## Overview of ADM7160ACPZN2.5-R7
The **ADM7160ACPZN2.5-R7** is an ultralow noise, Low Dropout (LDO) linear regulator produced by Analog Devices. It is specifically designed for high-performance analog and mixed-signal circuits where power supply noise must be kept to an absolute minimum.
---
### Key Specifications
| Feature | Specification |
| :--- | :--- |
| **Output Voltage** | 2.5 V (Fixed) |
| **Input Voltage Range** | 2.2 V to 5.5 V |
| **Maximum Output Current** | 200 mA |
| **Dropout Voltage** | 150 mV (at 200 mA load) |
| **Output Noise** | 2 μV rms (100 Hz to 100 kHz) |
| **PSRR** | 54 dB at 100 kHz; 40 dB at 1 MHz |
| **Package** | 6-lead LFCSP (2mm x 2mm) |
| **Operating Temp** | -40°C to +125°C |
---
### Technical Characteristics
#### 1. Low Noise Performance
The standout feature of this part is its **ultralow noise floor**. With only 2 μV rms noise, it is ideal for powering sensitive components like VCOs (Voltage Controlled Oscillators), ADCs, and precision sensors that would otherwise be degraded by switching regulator noise.
#### 2. High PSRR (Power Supply Rejection Ratio)
It effectively filters out high-frequency ripples from the primary power source. Even at frequencies as high as 1 MHz, it maintains a solid rejection ratio, making it a "clean-up" stage for DC-DC converter outputs.
#### 3. Small Form Factor
The **LFCSP (Lead Frame Chip Scale Package)** is extremely compact (2mm x 2mm), which is critical for modern mobile devices, handheld medical equipment, and dense PCB layouts.
---
### Typical Application Circuit
To ensure stability and performance, the ADM7160 requires minimal external components:
```c
// Basic Component Requirements
- Cin : 1 μF Ceramic Capacitor (Input filter)
- Cout : 1 μF Ceramic Capacitor (Output stability)
- EN : Enable Pin (Connect to Vin for "Always On")
```
### Application Use Cases
* **RF and Microwave Circuits:** Powering low-noise amplifiers (LNAs).
* **Medical Imaging:** High-resolution sensor arrays.
* **Communication Systems:** Precision clocking and timing synchronization.
---
- ⤷What is the difference between the ADM7160 and the ADM7150 series?
- ⤷ How does the dropout voltage affect the efficiency of this LDO?
- ⤷ What are the recommended thermal considerations for the 6-lead LFCSP package?