The **ATS-03F-14-C2-R0** is a specific electronic component categorized as a **Heat Sink**. It is part of the "pushPIN™" series manufactured by **Advanced Thermal Solutions (ATS)**. Below is a detailed technical breakdown of this component. --- ### 1. General Specifications This device is designed to dissipate heat from electronic components (like CPUs, GPUs, or power transistors) to the ambient air using passive or active airflow. | Feature | Specification | | :--- | :--- | | **Manufacturer** | Advanced Thermal Solutions Inc. (ATS) | | **Part Number** | ATS-03F-14-C2-R0 | | **Heat Sink Type** | pushPIN™ HS Assembly | | **Fin Type** | Fine-Pitch | | **Fin Pattern** | Blue-Anodized XCUT | | **Material** | Aluminum | | **Attachment Method** | Push-Pin (Spring Loaded) | --- ### 2. Physical Dimensions The dimensions are critical for ensuring compatibility with the Printed Circuit Board (PCB) layout and the component being cooled. | Dimension | Measurement | | :--- | :--- | | **Length (A)** | 50.00 mm | | **Width (B)** | 50.00 mm | | **Height (C)** | 20.00 mm | | **Pitch (E)** | 43.00 mm | | **Pitch (F)** | 43.00 mm | --- ### 3. Thermal Performance Thermal resistance indicates how effectively the heat sink removes heat. Lower values are generally better. * **Thermal Resistance (Unducted Flow):** ~9.97 °C/W @ 100 LFM (Linear Feet per Minute). * **Thermal Resistance (Ducted Flow):** ~1.56 °C/W @ 200 LFM. * **Thermal Interface Material (TIM):** This specific model typically comes with **T766** pre-applied thermal grease to improve conductivity between the chip and the aluminum. --- ### 4. Mounting System (pushPIN™) The "pushPIN" system is an electronic hardware feature that simplifies installation: * **Springs:** Provides consistent pressure (force) to ensure maximum contact with the component. * **Push-Pins:** Plastic or brass pins that lock into pre-drilled holes in the PCB. * **Reliability:** Designed to withstand vibration and thermal cycling common in industrial electronics. --- ### 5. Part Number Nomenclature (Decoding) The part number can be broken down to understand its features: * **ATS:** Advanced Thermal Solutions. * **03:** Series identifier. * **F:** Fin pitch style. * **14:** Specific internal geometry/size code. * **C2:** Material/Finish (Aluminum / Blue Anodized). * **R0:** Revision code.