The **ATS-06E-16-C2-R0** is a high-performance electronic thermal management component, specifically a **Heat Sink** manufactured by *Advanced Thermal Solutions (ATS)*. It belongs to the **ASAP (Advanced SMT Aluminum Passive)** series, designed for cooling electronic components like CPUs, GPUs, and power modules. --- ### 1. Technical Specifications The part number follows a specific nomenclature that defines its physical and thermal characteristics: | Parameter | Specification | | :--- | :--- | | **Component Type** | Passive Heat Sink | | **Material** | Aluminum (AL6063) | | **Finish** | Blue Anodized | | **Dimensions (L x W x H)** | 35.0mm x 35.0mm x 25.0mm | | **Fin Style** | Straight Fin | | **Attachment Method** | Push-Pin (2-Pin) | | **Thermal Resistance** | 1.80 °C/W (at 200 LFM) | --- ### 2. Key Electronic Functions While the heat sink itself is a mechanical part, its role in an electronic circuit is critical for **Thermal Regulation**: * **Heat Dissipation:** It increases the surface area of a semiconductor package, allowing heat to transfer from the junction to the ambient air via convection. * **Protection:** By maintaining the operating temperature below the maximum junction temperature ($T_j$), it prevents thermal throttling and permanent component failure. * **Performance Stability:** Cooling ensures that high-speed transistors maintain consistent switching speeds, as heat increases internal resistance and leakage current. --- ### 3. Physical Features & Mounting The "C2" and "R0" designations in the part number refer to specific material and environmental compliance standards: #### **Push-Pin Attachment** * This model uses a **2-pin push-pin system** with a brass or plastic pin and a compression spring. * It provides consistent pressure (load) on the component, ensuring high thermal interface material (TIM) performance. #### **Fin Configuration** * **Straight Fins:** Optimized for longitudinal airflow. If the device is inside a chassis with a fan, these fins channel air efficiently to maximize heat transfer. #### **Material Coating** * **Blue Anodized:** Not just for aesthetics; the anodized layer increases surface emissivity and provides electrical insulation to prevent short circuits if the sink accidentally touches exposed leads. --- ### 4. Thermal Performance Data The effectiveness of the ATS-06E-16-C2-R0 depends heavily on the airflow (measured in Linear Feet per Minute - LFM): | Air Velocity (LFM) | Thermal Resistance (°C/W) | | :--- | :--- | | 200 (1.0 m/s) | 1.80 | | 400 (2.0 m/s) | 1.15 | | 600 (3.0 m/s) | 0.95 | ---