The **ATS-06G-58-C2-R0** is a specific electronic component manufactured by **Advanced Thermal Solutions (ATS)**. It belongs to the thermal management category, specifically a high-performance heat sink designed for cooling integrated circuits (ICs) and other electronic components. --- ## 1. Technical Specifications Below are the primary physical and thermal characteristics of the device: | Property | Description | | :--- | :--- | | **Component Type** | Heat Sink | | **Series** | pushPIN™ | | **Material** | Aluminum | | **Finish** | Blue Anodized | | **Attachment Method** | Push-Pin (Plastic) | | **Thermal Resistance** | 10.11 °C/W (Unducted @ 100 LFM) | | **Dimensions (L x W x H)** | 40mm x 40mm x 15mm | | **Weight** | ~45 Grams | --- ## 2. Key Design Features ### Thermal Performance The "58" in the part number corresponds to a specific fin pattern designed for optimized airflow. The thermal resistance drops significantly as airflow (LFM - Linear Feet per Minute) increases: * **At 100 LFM:** 10.11 °C/W * **At 500 LFM:** 3.47 °C/W ### Push-Pin Attachment Mechanism The **pushPIN™** system is a hardware-based mounting solution. It uses a flexible spring-loaded pin that snaps into pre-drilled holes on the PCB. * **Reliability:** Provides consistent pressure for optimal thermal interface material (TIM) performance. * **Ease of Use:** Allows for quick installation without specialized tools. ### Material and Coating * **Aluminum 6063:** Chosen for its high thermal conductivity and lightweight properties. * **Blue Anodizing:** Protects the aluminum from corrosion and slightly improves radiant heat transfer. --- ## 3. Application Use Cases This part is typically used in environments where heat dissipation is critical for electronic longevity: 1. **Telecommunications:** Cooling high-speed processors in routers and switches. 2. **Embedded Systems:** Industrial PCs where space is limited but cooling is vital. 3. **Power Electronics:** Dissipating heat from VRMs or MOSFETs. --- ## 4. Hardware Compatibility The following table outlines the mounting requirements: | Feature | Specification | | :--- | :--- | | **Hole Pattern** | 33mm x 33mm (Square) | | **Spring Type** | ATS-PPS-06 (Standard) | | **Thermal Interface** | Pre-applied T766 Phase Change Material |