The **ATS-07A-47-C2-R0** is a specific electronic component manufactured by **Advanced Thermal Solutions (ATS)**. It is a high-performance heat sink designed for cooling integrated circuits (ICs) and other electronic components. Below is a detailed breakdown of its specifications and features. --- ### 1. General Specifications The part belongs to the **pushPIN™** series, which is known for its standardized mounting system. | Property | Value | | :--- | :--- | | **Manufacturer** | Advanced Thermal Solutions, Inc. (ATS) | | **Part Number** | ATS-07A-47-C2-R0 | | **Component Type** | Heat Sink | | **Attachment Method** | pushPIN™ | | **Fin Type** | Straight | | **Material** | Aluminum | | **Finish** | Blue Anodized | --- ### 2. Physical Dimensions Precision measurements are critical for ensuring the heat sink fits on the PCB without interfering with neighboring components. * **Length (A):** 45.00 mm * **Width (B):** 45.00 mm * **Height (C):** 12.70 mm * **Pitch (E):** 38.00 mm (Distance between mounting holes) * **Pitch (F):** 38.00 mm --- ### 3. Thermal Performance Thermal resistance determines how effectively the part dissipates heat. Lower values indicate better cooling performance. Values are typically measured in °C/W (Degrees Celsius per Watt). | Airflow Velocity (LFM) | Thermal Resistance (Unducted) | | :--- | :--- | | 100 (0.5 m/s) | 11.58 °C/W | | 300 (1.5 m/s) | 4.05 °C/W | | 500 (2.5 m/s) | 2.50 °C/W | | 700 (3.5 m/s) | 1.90 °C/W | --- ### 4. Key Design Features * **Push-Pin Mounting:** Features a pre-assembled push-pin and spring mechanism for easy installation. This ensures consistent pressure on the thermal interface material (TIM). * **Thermal Interface Material:** Usually comes with a pre-applied high-performance **Phase Change Material (PCM)** or thermal tape to maximize heat transfer from the chip to the aluminum fins. * **Straight Fin Design:** The straight fin pattern is optimized for airflow directed across the board, providing a balance between surface area and low pressure drop. * **C2 Rating:** This suffix typically refers to the specific material/finish or the thermal interface material grade used in this specific configuration. --- ### 5. Application Code Structure If you are ordering or looking for replacements, here is what the suffix codes mean: * **ATS:** Manufacturer (Advanced Thermal Solutions) * **07:** Series Number * **A:** Material/Finish Code * **47:** Length/Width identifier * **C2:** Thermal Interface Material / Color code * **R0:** Revision/Packaging code