The **ATS-07D-135-C2-R0** is a high-performance electronic thermal management component, specifically a **Heat Sink** manufactured by Advanced Thermal Solutions (ATS). It is designed to dissipate heat from electronic components like CPUs, GPUs, or power transistors to ensure stability and longevity. --- ### Technical Specifications The following table outlines the primary mechanical and thermal characteristics of this part: | Characteristic | Specification | | :--- | :--- | | **Manufacturer** | Advanced Thermal Solutions Inc. (ATS) | | **Series** | pushPIN™ | | **Thermal Resistance** | 3.00°C/W (at 100 LFM) | | **Attachment Method** | Push-Pin (Plastic/Brass) | | **Material** | Aluminum | | **Finish** | Blue Anodized | | **Dimensions (L x W x H)** | 70.00mm x 70.00mm x 20.00mm | | **Fin Style** | Fine-Pitch (Straight) | --- ### Key Design Features 1. **pushPIN™ Attachment:** The "R0" designation refers to the specific attachment kit. This system uses a flexible spring-loaded mechanism that provides precise pressure for optimal thermal interface material (TIM) performance without damaging the PCB. 2. **Fine-Pitch Fins:** The "D" in the part number indicates a specific fin density. This design maximizes surface area within a small footprint, making it ideal for high-airflow environments where space is limited. 3. **Blue Anodized Coating:** Beyond aesthetics, the anodized surface increases thermal emissivity and provides electrical insulation and corrosion resistance to the aluminum base. --- ### Thermal Performance Data *Note: Performance varies based on air velocity (Linear Feet per Minute).* | Airflow Velocity (LFM) | 100 | 200 | 300 | 400 | 500 | | :--- | :--- | :--- | :--- | :--- | :--- | | **Resistance (°C/W) Unducted** | 3.00 | 1.46 | 1.05 | 0.85 | 0.73 | | **Resistance (°C/W) Ducted** | 1.18 | 0.73 | 0.59 | 0.52 | 0.47 | --- ### Comparison to Similar Models ```json { "Model_Comparison": { "ATS-07D-135-C2-R0": "70x70x20mm (Standard)", "ATS-07D-136-C2-R0": "70x70x25mm (Higher Profile)", "ATS-07E-135-C2-R0": "70x70x20mm (Different Fin Pitch)" } } ```