The **ATS-07D-138-C3-R0** is a high-performance electronic thermal management component, specifically an **Advanced Thermal Solutions (ATS) push-pin heatsink**. It is designed to dissipate heat from electronic integrated circuits (ICs) like CPUs, GPUs, or FPGAs. ### 1. Technical Specifications Below are the primary physical and thermal characteristics of this part: | Parameter | Specification | | :--- | :--- | | **Product Series** | pushPIN™ | | **Material** | Aluminum (AL6063) | | **Finish** | Blue Anodized | | **Attachment Method** | Push-Pin (Brass) | | **Fin Type** | Fine-Pitch (Straight Fin) | | **Thermal Resistance (Flow)** | 12.22 °C/W @ 100 LFM | | **Dimensions (L x W x H)** | 25.0mm x 25.0mm x 15.0mm | | **Thermal Interface Material** | T412 (Pre-applied) | --- ### 2. Key Electronic Features #### A. Thermal Performance This heatsink is engineered for high-density electronic packaging. The **Fine-Pitch** design maximizes the surface area within a small 25mm footprint, allowing it to handle significant heat loads in environments with low to medium airflow. #### B. Attachment Mechanism (Push-Pin) Unlike adhesive-based heatsinks, the `ATS-07D-138-C3-R0` uses a mechanical push-pin system. * **Security:** Provides a consistent, high-pressure connection between the heatsink and the component. * **Ease of Assembly:** Features a pre-assembled "push-pin" that snaps into holes on the PCB. * **Compatibility:** The brass pins are durable and designed for 20mm hole-to-hole spacing. #### C. Thermal Interface Material (TIM) The part comes pre-applied with **T412 thermal grease**. This is critical for electronics because it fills microscopic air gaps between the IC and the heatsink, significantly reducing thermal resistance at the contact point. --- ### 3. Typical Applications This specific model is commonly used in: 1. **Networking Hardware:** Routers, switches, and small-form-factor servers. 2. **Embedded Systems:** Industrial PCs where mechanical vibration might dislodge adhesive heatsinks. 3. **Power Supplies:** Cooling voltage regulators or power transistors. --- ### 4. Cross-Reference & Mounting Data ```json { "Part_Number": "ATS-07D-138-C3-R0", "Pitch": "Fine-Pitch", "Pattern": "Square", "Mounting_Hole_Spacing": "20.0mm", "Spring_Type": "Compression Spring" } ```