The **ATS-07F-135-C2-R0** is a high-performance electronic thermal management component, specifically a **Heat Sink** manufactured by *Advanced Thermal Solutions (ATS)*. It belongs to the **Blue Anodized** series, designed for cooling electronic components like CPUs, GPUs, and power modules. --- ### 1. Technical Specifications The following table summarizes the physical and thermal characteristics of the part: | Characteristic | Specification | | :--- | :--- | | **Material** | Aluminum | | **Finish** | Blue Anodized | | **Attachment Method** | pushPIN™ (Spring-loaded) | | **Dimensions (L x W x H)** | 35.0mm x 35.0mm x 30.0mm | | **Fin Style** | Fine Pitch (Cross-cut) | | **Thermal Resistance** | 2.98 °C/W (at 100 LFM) | | **Compatibility** | High-density PCB layouts | --- ### 2. Key Design Features * **pushPIN™ Attachment:** This model uses a specialized push-pin mechanism with a built-in spring. This ensures consistent pressure (clamping force) on the heat source, improving thermal transfer without the risk of damaging the PCB. * **Fine Pitch Fins:** The "F" in the part number indicates a fine-pitch fin pattern. This maximizes surface area, allowing for better heat dissipation in systems with forced air cooling (fans). * **Pre-applied Thermal Interface Material (TIM):** Most "C2" variants come with a high-performance thermal pad or grease pre-applied to the base, simplifying the installation process. * **Cross-Cut Pattern:** The fins are cut in both directions, which makes the heat sink "omni-directional." It can receive airflow from any angle, making it versatile for complex chassis airflow. --- ### 3. Thermal Performance Metrics The thermal resistance of this part varies based on the airflow velocity (measured in Linear Feet per Minute - LFM): | Airflow Velocity (LFM) | Thermal Resistance (°C/W) | | :--- | :--- | | 100 (0.5 m/s) | 2.98 | | 300 (1.5 m/s) | 1.68 | | 500 (2.5 m/s) | 1.34 | | 700 (3.5 m/s) | 1.18 | --- ### 4. Part Number Breakdown * **ATS:** Manufacturer (Advanced Thermal Solutions) * **07:** Series/Product Line * **F:** Fin Pitch (Fine) * **135:** Dimensions/Internal Design Code * **C2:** Thermal Interface Material / Finish Code * **R0:** Revision/Packaging Code