The **ATS-07F-171-C2-R0** is a high-performance heat sink manufactured by **Advanced Thermal Solutions (ATS)**. It is part of the "push-pin" attachment series designed for cooling electronic components such as CPUs, GPUs, and other integrated circuits. --- ### 1. Technical Specifications The part number follows a specific nomenclature used by ATS to describe its physical and thermal characteristics. | Feature | Specification | | :--- | :--- | | **Material** | Aluminum | | **Finish** | Blue Anodized | | **Attachment Method** | Push-Pin (Plastic) | | **Dimensions (L x W x H)** | 30mm x 30mm x 20mm | | **Thermal Resistance** | 7.33°C/W (at 200 LFM) | | **Fin Pattern** | XC-Cut (Cross-cut) | --- ### 2. Key Component Features #### A. XC-Cut Fin Design Unlike straight-fin heat sinks, the XC-cut design features a "pin-fin" style grid. This allows for: * **Omnidirectional Airflow:** It can dissipate heat effectively regardless of which direction the cooling fan is blowing. * **Increased Surface Area:** The cross-cuts increase the total area available for heat transfer to the ambient air. #### B. Push-Pin Attachment The model uses a **spring-loaded push-pin** mechanism. * **Reliability:** It provides consistent pressure on the component, ensuring better thermal contact. * **Ease of Installation:** No specialized tools are required for mounting on a PCB with pre-drilled holes. #### C. Thermal Interface Material (TIM) Typically, the "R0" suffix indicates that the heat sink comes with a pre-applied **T766 phase change material** or a similar thermal pad. This eliminates the need for manual application of thermal paste during assembly. --- ### 3. Application Use Cases This specific heat sink is categorized as a "board-level" thermal management solution. 1. **High-Speed Networking:** Used on ASICs and FPGAs in routers and switches. 2. **Embedded Computing:** Cooling processors in industrial PCs. 3. **Power Electronics:** Dissipating heat from large MOSFETs or voltage regulators. --- ### 4. Part Number Breakdown The code `ATS-07F-171-C2-R0` can be interpreted as follows: * **ATS:** Manufacturer (Advanced Thermal Solutions). * **07:** Series number. * **F:** Fin style/configuration. * **171:** Specific dimensions and thermal profile. * **C2:** Blue Anodized finish. * **R0:** Revision/Thermal Interface Material type.