The **ATS-10B-182-C2-R0** is a high-performance electronic thermal management component, specifically an **Advanced Thermal Solutions (ATS) push-pin heatsink**. It is designed for cooling electronic components such as CPUs, GPUs, or high-power ASICs on a Printed Circuit Board (PCB). --- ### 1. Technical Specifications The model number encodes specific physical and thermal characteristics: | Property | Specification | | :--- | :--- | | **Component Type** | Heat Sink | | **Attachment Method** | Push-Pin (Plastic) | | **Fin Style** | Straight (Extruded) | | **Material** | Aluminum (Blue Anodized) | | **Dimensions** | 45mm x 45mm x 15mm | | **Thermal Resistance** | 7.51°C/W (@ 100 LFM) | | **Thermal Interface Material (TIM)** | T766 (Pre-applied) | --- ### 2. Key Features and Design #### A. Attachment Mechanism (Push-Pin) The "B" in the part number indicates the use of **plastic push-pins** and springs. This mechanism provides: * **Constant Pressure:** Ensures optimal contact between the heatsink base and the chip. * **Ease of Assembly:** Can be installed manually or with automated equipment through pre-drilled holes in the PCB. #### B. Material and Finish * **Aluminum 6063:** Chosen for its high thermal conductivity and lightweight properties. * **Blue Anodization:** Not only provides a professional aesthetic but also increases surface emissivity and protects the aluminum from corrosion. #### C. Thermal Performance This heatsink is designed for **forced air** (fan-cooled) environments. The performance varies significantly based on the Linear Feet per Minute (LFM) of airflow: * **@ 100 LFM:** 7.51 °C/W * **@ 300 LFM:** 3.82 °C/W * **@ 500 LFM:** 2.91 °C/W --- ### 3. Application Use Cases This specific part is typically found in: 1. **Networking Hardware:** Switches, routers, and modems. 2. **Industrial Controllers:** Cooling Power Management ICs (PMICs). 3. **Embedded Systems:** Single-board computers requiring low-profile cooling (15mm height). --- ### 4. Comparison to Similar Parts ```python # Part Number Breakdown Example part_series = "ATS-10B" # 10B = Push-pin series dimensions = "182" # Specific size code (45x45x15mm) material_code = "C2" # Blue Anodized Aluminum revision = "R0" # Standard Revision ```