The **ATS-13F-93-C2-R0** is a high-performance electronic thermal management component, specifically a **Heat Sink** manufactured by *Advanced Thermal Solutions (ATS)*. It is part of their "pushPIN™" heat sink assembly line, designed for cooling integrated circuits (ICs) and other electronic components. --- ### 1. Technical Specifications Below is a breakdown of the physical and thermal characteristics of this specific part number: | Specification | Value/Details | | :--- | :--- | | **Manufacturer** | Advanced Thermal Solutions Inc. (ATS) | | **Material** | Aluminum (AL6063) | | **Attachment Method** | pushPIN™ (Spring-loaded plastic pegs) | | **Fin Style** | Straight Fin (Cross-cut for improved airflow) | | **Dimensions (L x W x H)** | 40.00mm x 40.00mm x 20.00mm | | **Thermal Resistance** | 12.32 °C/W (@ 100 LFM) | | **Finish** | Blue Anodized | | **Thermal Interface Material (TIM)** | T766 (Pre-applied phase change material) | --- ### 2. Design and Components The part is engineered to maximize surface area while maintaining a low profile for space-constrained PCB environments. * **Push-Pin Mounting:** Unlike adhesive-based heat sinks, the "pushPIN" system uses a brass or plastic pin with a stainless steel spring. This provides consistent pressure (load) on the component, ensuring optimal heat transfer. * **Cross-Cut Fin Pattern:** The vertical fins are cut horizontally to allow for multi-directional airflow, making it effective in systems where air direction might change or be turbulent. * **T766 TIM:** This is a high-performance thermal pad pre-applied to the base. It eliminates the need for manual thermal paste application during assembly. --- ### 3. Thermal Performance Profile The efficiency of the heat sink varies based on the airflow (Linear Feet per Minute - LFM) inside the electronic enclosure: | Airflow Velocity (LFM) | Thermal Resistance (°C/W) | | :--- | :--- | | 100 (0.5 m/s) | 12.32 | | 200 (1.0 m/s) | 4.46 | | 400 (2.0 m/s) | 2.23 | | 600 (3.0 m/s) | 1.59 | --- ### 4. Part Number Decoder The part number **ATS-13F-93-C2-R0** can be broken down as follows: * **ATS**: Manufacturer (Advanced Thermal Solutions). * **13**: Series/Attachment type (pushPIN™). * **F**: Fin Type (Fine pitch/Straight). * **93**: Dimension/Design code. * **C2**: Material and Finish (Aluminum, Blue Anodized). * **R0**: Revision/Packaging code.