The **ATS-16F-147-C3-R0** is a high-performance electronic thermal management component, specifically a **Heat Sink** manufactured by Advanced Thermal Solutions (ATS). It belongs to the **pushPIN™** series, designed for efficient cooling of integrated circuits (ICs) and other PCB components. ### 1. Technical Specifications The following table outlines the physical and thermal characteristics of this specific part: | Parameter | Specification | | :--- | :--- | | **Material** | Aluminum | | **Finish** | Blue Anodized | | **Attachment Method** | pushPIN™ (Spring-loaded) | | **Fin Style** | Straight (Square) | | **Dimensions (L x W x H)** | 35.00mm x 35.00mm x 10.00mm | | **Hole Pattern** | 40.00mm (pitch) | | **Thermal Resistance** | 13.65 °C/W (at 100 LFM) | --- ### 2. Design and Composition * **Material:** Made from lightweight **Aluminum (AL6063)**, which offers excellent thermal conductivity and durability. * **Fin Configuration:** The "Straight Fin" design is optimized for airflow from a specific direction, commonly used in systems with forced-air cooling (fans). * **Thermal Interface Material (TIM):** This specific part number typically comes pre-applied with **T412** thermal tape or high-performance thermal grease to ensure maximum heat transfer from the component to the sink. --- ### 3. Mounting Mechanism (pushPIN™) The "16F" in the part number refers to the specific attachment style. The pushPIN™ system uses: 1. **Spring-loaded Pins:** Provides consistent pressure across the interface for optimal thermal contact. 2. **Ease of Assembly:** Allows for quick installation and removal without the need for complex tools. 3. **Hardware:** Typically uses brass or plastic pins with stainless steel springs to prevent vibration loosening. --- ### 4. Part Number Breakdown The part number follows a specific nomenclature used by Advanced Thermal Solutions: | Segment | Meaning | | :--- | :--- | | **ATS** | Advanced Thermal Solutions | | **16F** | Hardware/Spring Type (pushPIN™ series) | | **147** | Specific Design/Dimensions ID | | **C3** | Material & Finish (Aluminum / Blue Anodized) | | **R0** | RoHS Compliant / Revision code |