The **ATS-17D-22-C2-R0** is a specific electronic cooling component, categorized as a high-performance **Heat Sink**. It is manufactured by Advanced Thermal Solutions (ATS) as part of their "push-pin" series designed for cooling processors and other high-heat surface-mount components. --- ## 1. Technical Specifications The following table summarizes the key physical and thermal properties of this specific part number: | Feature | Specification | | :--- | :--- | | **Material** | Aluminum (Blue Anodized) | | **Attachment Method** | Push-Pin (Plastic) with Springs | | **Thermal Resistance** | 13.87°C/W (at 200 LFM) | | **Dimensions** | 40mm x 40mm | | **Height** | 15mm | | **Fin Style** | Straight Fin | | **Thermal Interface Material** | T766 (Pre-applied) | --- ## 2. Key Component Breakdown ### A. The Heat Sink Body The body is constructed from **Aluminum** and treated with a **Blue Anodized** finish. The finish is not just aesthetic; it increases the surface emissivity, slightly improving radiation heat transfer, and provides a protective layer against corrosion. ### B. Push-Pin Attachment Mechanism Instead of using adhesive tape or soldering, this model uses a mechanical mounting system: * **Plastic Push-Pins:** These provide consistent pressure against the component. * **Brass Springs:** The springs ensure a specific downward force (Pre-load) to maximize the effectiveness of the thermal interface material without cracking the silicon die. ### C. Thermal Interface Material (TIM) The part comes pre-applied with **T766**. This is a high-performance phase-change material that fills microscopic air gaps between the heat sink and the electronic component (CPU/GPU/FPGA), significantly reducing thermal resistance. --- ## 3. Part Number Nomenclature Understanding the code `ATS-17D-22-C2-R0`: * **ATS:** Advanced Thermal Solutions (Manufacturer). * **17:** Specific series/designator for push-pin sinks. * **D:** Specific mounting hole pattern or pin type. * **22:** Height and fin configuration code. * **C2:** Material/Finish code (Blue Anodized Aluminum). * **R0:** Revision code (Standard RoHS compliant version). --- ## 4. Application Use Cases This part is typically found in: 1. **Network Switches/Routers:** Cooling ASICs or high-speed controllers. 2. **Embedded Systems:** Industrial PCs where vibration resistance (provided by pins) is necessary. 3. **Power Electronics:** Cooling MOSFET arrays or voltage regulators. ---