The **FCRS-F1-R** is an electronic component primarily associated with the **FCRS series (Flex-to-Board / FPC Connectors)** by manufacturers like JAE (Japan Aviation Electronics) or similar industrial hardware suppliers. It is a high-performance connector designed for compact electronic assemblies. --- ### 1. Technical Specifications The following table outlines the typical electronic and physical characteristics of this part: | Feature | Specification | | :--- | :--- | | **Component Type** | FPC/FFC Connector (Flexible Printed Circuit) | | **Series** | FCRS Series | | **Mounting Type** | Surface Mount (SMT) | | **Pitch** | Typically 0.5mm or 1.0mm (varies by sub-model) | | **Termination** | Solder | | **Orientation** | Right Angle (R designation) | | **Contact Material** | Copper Alloy with Gold Plating | --- ### 2. Key Electronic Components & Design The FCRS-F1-R consists of several critical sub-elements that define its performance: #### A. Contact Terminals * **Material:** Usually phosphor bronze or copper alloy. * **Plating:** Gold plating is used to ensure high conductivity and prevent oxidation over long periods. * **Function:** Provides the electrical bridge between the flexible circuit and the rigid PCB. #### B. Housing (Insulator) * **Material:** High-temperature thermoplastic (e.g., LCP - Liquid Crystal Polymer). * **Function:** Maintains electrical isolation between pins and withstands the heat of reflow soldering. #### C. Locking Mechanism (Actuator) * The "F1" designation often refers to a specific locking style, such as a **flip-lock** or **ZIF (Zero Insertion Force)** mechanism. * This allows the FPC cable to be inserted with no friction, and then locked into place to ensure a constant electrical connection. --- ### 3. Application Use Cases Because of its small footprint and "Right Angle" (R) orientation, it is commonly used in: * **Handheld Devices:** Smartphones, tablets, and digital cameras. * **Display Modules:** Connecting LCD/OLED screens to the main logic board. * **Automotive Electronics:** Infotainment systems and dashboard sensors where space is tight. --- ### 4. Implementation Example (PCB Footprint) When designing a PCB for this part, the landing pattern must account for the SMT pads. ```c // Example PAD dimensions for a 0.5mm pitch FPC connector Pad_Width = 0.30mm; Pad_Length = 1.50mm; Gap_Between_Pads = 0.20mm; ``` ---