Electronic Components Datasheet Search
  English  ▼
ALLDATASHEET.NET

X  

  • FRS-R-1

  • AI
    ### Overview of the FRS-R-1 Fuse The **FRS-R-1** is a high-performance, industrial-grade fuse manufactured primarily by **Bussmann (Eaton)**. It belongs to the **Fusetron™** series and is classified as a Class RK5 fuse. This specific part is designed for circuit protection in systems where high motor loads or inductive surges are present. --- ### Technical Specifications | Feature | Specification | | :--- | :--- | | **Model Number** | FRS-R-1 | | **Amperage Rating** | 1 Amp | | **Voltage Rating (AC)** | 600 Vac | | **Voltage Rating (DC)** | 300 Vdc | | **Interrupting Rating** | 200,000A RMS Symmetrical (AC) / 20,000A (DC) | | **Class** | RK5 | | **Fuse Type** | Dual-Element, Time-Delay | | **Physical Size** | 0.81" Diameter x 5.00" Length (Standard 600V RK5 dimensions) | --- ### Key Electronic Components and Features #### 1. Dual-Element Design Unlike standard "fast-acting" fuses, the FRS-R-1 contains two distinct elements: * **Thermal Element:** Handles low-level overloads (1.35x to 2x the rating). It provides a "time-delay" that allows temporary surges—such as motor startups—to pass without blowing the fuse. * **Short-Circuit Element:** A high-speed notched copper link that reacts instantly to massive current spikes (short circuits), protecting sensitive equipment from catastrophic failure. #### 2. Current Limitation As a Class RK5 fuse, the FRS-R-1 is "current-limiting." This means it can clear a fault so quickly that the peak current never reaches its full destructive potential, significantly reducing the **thermal energy (I²t)** and magnetic force exerted on downstream components. #### 3. Rejection Feature The "R" in FRS-R denotes the **Rejection** feature. The fuse has a specific physical notch in one of the end caps. When used with an R-series fuse block, it prevents the accidental installation of lower-rated fuses (like Class H) that lack the same interrupting capacity. --- ### Common Applications * **Motor Protection:** Ideally suited for 600V motor circuits where small 1-amp protection is required for control power transformers or small motors. * **Solenoids and Transformers:** Protects against sustained overloads while ignoring the initial inrush current. * **Branch Circuit Protection:** Used in industrial panels to protect specific legs of a power distribution system. ---
    ✨ Follow-up Questions
    • ⤷ What is the difference between an RK5 and an RK1 fuse?
    • ⤷How do I test if an FRS-R-1 fuse is blown using a multimeter?
    • ⤷Can an FRS-R-1 be used in a 250V circuit safely?