FYA-R1408ZX
AI

The **FYA-R1408ZX** is a high-performance electronic component, specifically a **1.4-inch Single Digit 7-Segment LED Display**. This part is commonly used in digital clocks, instrument panels, and electronic meters to display numeric information.
---
### 1. Technical Specifications
The following table outlines the primary electrical and physical characteristics of the FYA-R1408ZX:
| Feature | Specification |
| :--- | :--- |
| **Digit Height** | 1.4 Inches (35.56 mm) |
| **Configuration** | Single Digit |
| **Emitting Color** | Typically Red (High Efficiency) |
| **Polarity** | Common Anode (ZX usually denotes configuration) |
| **Forward Voltage ($V_F$)** | 1.8V to 2.2V per segment |
| **Operating Current ($I_F$)** | 20mA (Recommended) |
| **Luminous Intensity** | 30 - 60 mcd |
| **Surface Color** | Black face with white segments |
---
### 2. Segment Architecture
Like standard 7-segment displays, this part consists of 7 individual LEDs arranged in a figure-eight pattern, with an 8th LED for the decimal point (DP).
* **Segments A-G:** Form the numerical digits 0-9.
* **DP:** Decimal point for fractional values.
* **Internal Circuitry:** In a **Common Anode** version, all the positive terminals (anodes) of the LEDs are tied together to a single pin, while the individual segments are turned on by grounding their respective cathodes.
---
### 3. Connection Example
To interface this display with a microcontroller (like an Arduino or ESP32), you must use current-limiting resistors to prevent burnout.
```cpp
// Example: Mapping segments to Arduino Pins
int segA = 2;
int segB = 3;
int segC = 4;
// ... and so on
void setup() {
pinMode(segA, OUTPUT);
// Common Anode: Write LOW to turn ON the segment
digitalWrite(segA, LOW);
}
```
---
### 4. Key Applications
* **Industrial Controllers:** Displaying temperature or pressure readings.
* **Consumer Electronics:** Microwave timers or digital scales.
* **Scoreboards:** Large digit size makes it suitable for visibility from a distance.
* **Testing Equipment:** Multimeters and frequency counters.
- ⤷
What is the difference between Common Anode and Common Cathode versions of this display?
- ⤷ What value of resistor is recommended for a 5V power supply?
- ⤷ Can this display be multiplexed with other digits to save pins?