LM39102G-SH2-R
AI

The **LM39102G-SH2-R** is a high-performance, low-dropout (LDO) linear voltage regulator. It is designed for applications requiring high current, fast transient response, and precision output voltage.
---
### 1. Key Technical Specifications
The following table highlights the primary electrical characteristics of the LM39102G-SH2-R:
| Parameter | Specification |
| :--- | :--- |
| **Output Current** | 1.0 Ampere |
| **Input Voltage Range** | 2.25V to 16V |
| **Dropout Voltage** | Typ. 410mV @ 1A |
| **Output Type** | Adjustable (ADJ) |
| **Reference Voltage** | 1.24V |
| **Package Type** | HSOP-8 / SOP-8 (Exposed Pad) |
| **Operating Temp** | -40°C to +125°C |
---
### 2. Functional Features
The "G" in the part number usually signifies a "Green" (Halogen-free) product, and the suffix "R" typically denotes Tape & Reel packaging.
* **Adjustable Output:** Unlike fixed-voltage regulators, this part uses an external resistor divider to set the output voltage from 1.24V up to nearly the input voltage.
* **Fast Transient Response:** Optimized for powering digital circuits (like FPGAs or DSPs) where load currents can change rapidly.
* **Protection Circuitry:**
* **Current Limiting:** Protects the device during overload conditions.
* **Thermal Shutdown:** Shuts the device down if the internal junction temperature exceeds safety limits.
* **Reverse Current Protection:** Prevents damage if the output voltage is higher than the input voltage.
* **Enable Pin (EN):** Allows the regulator to be turned on or off digitally to save power in standby mode.
---
### 3. Application Circuit (Example)
To calculate the output voltage ($V_{OUT}$), the following standard formula for adjustable LDOs is used:
```cpp
// Vout Formula
Vout = Vref * (1 + R1 / R2)
// Where:
// Vref = 1.24V
// R1 = Resistor between OUT and ADJ pins
// R2 = Resistor between ADJ and GND pins
```
### 4. Comparison with Standard Regulators
| Feature | LM39102G | Standard 7805 |
| :--- | :--- | :--- |
| **Efficiency** | High (LDO) | Low (Non-LDO) |
| **Dropout** | ~0.4V | ~2.0V |
| **Adjustability** | Yes | No (Fixed) |
| **Size** | Small Surface Mount | Large TO-220 |
---
- ⤷
What is the maximum power dissipation for the HSOP-8 package?
- ⤷ How do I select the capacitor values for stability?
- ⤷ What are the common pinout configurations for the LM39102?