LRF2512-R01FT1
AI

The **LRF2512-R01FT1** is a high-power, low-resistance surface mount (SMD) resistor manufactured by **Welwyn (TT Electronics)**. It is specifically designed for current sensing applications where high precision and thermal stability are required.
---
### 1. Key Technical Specifications
The following table summarizes the primary electrical and mechanical characteristics of the LRF2512-R01FT1:
| Parameter | Specification |
| :--- | :--- |
| **Resistance Value** | 0.01 $\Omega$ (10 m$\Omega$) |
| **Tolerance** | ±1% (F) |
| **Power Rating** | 2 Watts |
| **Package Size** | 2512 (6.4mm x 3.2mm) |
| **Temperature Coefficient (TCR)** | ±100 ppm/°C |
| **Technology** | Thick Film on Steel or Ceramic |
| **Operating Temperature** | -55°C to +150°C |
---
### 2. Breakdown of the Part Number
Understanding the nomenclature helps identify the component's limits:
- **LRF**: The series name (Low Resistance Metal Film/Thick Film).
- **2512**: The physical footprint (0.25 inches x 0.12 inches).
- **R01**: The resistance value. "R" acts as the decimal point (0.01 $\Omega$).
- **F**: The tolerance code (F = ±1%).
- **T1**: Packaging information (typically refers to Tape and Reel).
---
### 3. Functional Features
* **Current Sensing:** Because of its very low resistance (10m$\Omega$), it is used to measure current flow by monitoring the voltage drop across it ($V = I \times R$) with minimal power loss.
* **High Power Dissipation:** The 2512 package is larger than standard resistors, allowing it to dissipate up to 2W of heat safely.
* **Low Inductance:** Its construction minimizes inductive reactance, making it suitable for high-frequency switching applications.
---
### 4. Typical Applications
This component is commonly found in power management circuits, including:
1. **Battery Management Systems (BMS):** Monitoring charge and discharge cycles.
2. **DC-DC Converters:** Providing feedback for current-mode control.
3. **Motor Control:** Detecting overcurrent conditions to protect the motor.
4. **Power Supplies:** Load regulation and short-circuit protection.
---
- ⤷
What is the difference between thick film and metal foil current sense resistors?
- ⤷ How do I calculate the maximum current this resistor can handle based on its 2W rating?
- ⤷ What are the recommended PCB layout patterns for 2512 sense resistors to ensure accuracy?