M6NWVS-DAY-R
AI

The **M6NWVS-DAY-R** is a specific model of a **Network Vandal Dome Camera** typically manufactured by Sony (part of the SNC-VM6 series). This device is a high-performance security camera designed for outdoor surveillance.
Below is an explanation of its internal electronic components and technical specifications.
---
### 1. Image Sensing and Processing
The core electronics responsible for capturing visual data:
| Component | Specification | Function |
| :--- | :--- | :--- |
| **Image Sensor** | 1/2.9-type progressive scan Exmor CMOS | Converts light into electronic signals with high sensitivity. |
| **Processor** | IPELA ENGINE EX | Sony's proprietary DSP (Digital Signal Processor) for noise reduction and image stabilization. |
| **Effective Pixels** | Approx. 2.14 Megapixels | Provides 1080p Full HD resolution. |
### 2. Optical and Electromechanical Parts
These parts manage how light enters the sensor and how the camera adjusts its view:
* **View-DR Technology:** An electronic circuit process that combines multiple images at different exposure times to achieve a wide dynamic range (up to 90 dB).
* **IR Cut Filter:** A mechanical/electronic "Day/Night" filter that shifts to allow infrared light at night and block it during the day for accurate color reproduction.
* **Motorized Zoom/Focus:** Allows the user to electronically adjust the focal length (typically 3.0 mm to 9.0 mm) via the network interface.
### 3. Connectivity and Power Electronics
The backend electronics manage data transmission and power intake:
* **Ethernet Port (RJ-45):** Supports 10BASE-T/100BASE-TX.
* **PoE (Power over Ethernet):** The internal power supply unit (PSU) is designed to draw power directly from the data cable (IEEE 802.3af compliant).
* **On-board Storage:** Includes an SD card slot for local edge storage.
* **I/O Interfaces:** Includes mini-jacks for audio input/output and sensing terminals for alarm triggers.
### 4. Environmental and Protective Electronics
Since this is a "Vandal" (V) and "Outdoor" (W) rated unit, it includes:
* **Heater/Ventilator:** Internal circuitry to regulate temperature, allowing the camera to operate in temperatures as low as -40°C.
* **IK10 Rated Housing:** Electronic components are shielded by a high-impact resistant dome.
* **IP66 Rating:** Sealed connectors to prevent water and dust ingress.
---
### Technical Summary Table
| Feature | Description |
| :--- | :--- |
| **Resolution** | 1920 x 1080 |
| **Compression Formats** | H.264 (High/Main/Baseline Profile), JPEG |
| **Frame Rate** | Up to 60 fps |
| **Minimum Illumination** | Color: 0.1 lx, B/W: 0.07 lx |
- ⤷
How does the View-DR technology handle high-contrast lighting?
- ⤷ What are the power consumption requirements for this camera when the heater is active?
- ⤷ Is this camera compatible with standard ONVIF profiles?