Based on the part number **MHR16FBJ-R**, this component is a **high-voltage, thick-film chip resistor** typically manufactured by companies like **RoyalOhm** or similar electronic component providers. These resistors are designed to handle significantly higher voltages than standard general-purpose resistors. ### Technical Specifications The alphanumeric code provides specific details regarding the resistor's physical and electrical characteristics: | Parameter | Specification | Description | | :--- | :--- | :--- | | **Series** | MHR | Metal High Voltage Thick Film | | **Size / Package** | 1206 (Metric 3216) | Dimensions: 3.2mm x 1.6mm | | **Power Rating** | 1/4W (0.25 Watt) | Power dissipation at 70°C | | **Tolerance** | ±1% (F) | High precision resistance range | | **Resistance Value** | 1.6MΩ (16FB) | 1.6 Mega-Ohms | | **Voltage Rating** | Up to 500V - 800V | High working voltage capability | | **Packaging** | -R | Tape & Reel (7 inch reel) | --- ### Key Features * **High Voltage Handling:** Unlike standard 1206 resistors (usually rated for 200V), the MHR series is engineered with a specialized resistive element pattern to prevent arcing and electrical breakdown at high potentials. * **Thick Film Technology:** Uses a metal glaze layer fired onto a high-grade ceramic body, ensuring stability and durability. * **Precision:** The 1% tolerance (indicated by the 'F') makes it suitable for voltage sensing and feedback loops where accuracy is critical. * **Reliability:** Typically features a multilayer electrode construction and a protective overcoat to resist moisture and environmental stress. --- ### Common Applications Because of its high voltage rating and precision, the **MHR16FBJ-R** is frequently found in the following circuits: 1. **Power Supplies:** Used in the primary side of Switched-Mode Power Supplies (SMPS) for voltage startup. 2. **Inverters:** Essential for DC-AC conversion systems in solar or industrial motors. 3. **Voltage Dividers:** Used to scale down high voltages for measurement by microcontrollers or Op-Amps. 4. **Lighting Ballasts:** Found in high-intensity discharge (HID) or LED driver circuits. --- ### Comparison with Standard Resistors | Feature | Standard 1206 Resistor | MHR16FBJ-R (High Voltage) | | :--- | :--- | :--- | | **Max Working Voltage** | ~200V | ~500V+ | | **Insulation** | Standard Glass Overcoat | Specialized High-Dielectric Layer | | **Typical Use** | Logic/Signal levels | Power/Mains interface |