RTS-3BC-R/E
AI

## Analysis of the RTS-3BC-R/E Electronic Component
The **RTS-3BC-R/E** is a specific model within the series of **Rotary Dips** or **Rotary Coded Switches**, typically manufactured by companies like **Copals Electronics (Nidec)** or similar precision component vendors. These are used to set binary values or configuration parameters on a PCB without the need for external software tools.
### 1. General Specifications
The "RTS" series generally represents a subminiature rotary selector switch. Below is a breakdown of the typical technical characteristics for this specific variant:
| Feature | Specification |
| :--- | :--- |
| **Type** | Rotary Coded Switch |
| **Code Type** | Binary Coded Decimal (BCD) or Real Code |
| **Positions** | 10 Positions (0-9) |
| **Actuator Style** | Recessed (usually slotted for screwdriver) |
| **Mounting Type** | Through-hole (R/E often denotes Right-angle or specific lead forming) |
| **Contact Rating** | 100mA @ 5V DC (Switching), 100mA @ 50V DC (Non-switching) |
| **Operating Temp** | -25°C to +70°C |
---
### 2. Part Number Breakdown
While manufacturer coding can vary slightly, the suffix **R/E** usually provides specific mechanical details:
* **RTS**: Series designation (Rotary Terminal Switch).
* **3**: Often refers to the size or internal design revision (e.g., 7mm or 10mm square).
* **BC**: **B**inary **C**oded. This means the output pins provide a binary representation of the dial position.
* **R/E**:
* **R**: Can indicate **Right Angle** orientation, where the dial faces the side of the board.
* **E**: Often denotes **Tape & Reel** packaging or a specific **Environmental** sealing rating (like IP67).
---
### 3. Pin Configuration and Truth Table
For a BCD coded switch, there are typically 5 pins: 1 Common (C) and 4 output bits ($2^0, 2^1, 2^2, 2^3$).
| Dial Position | Common to Pin 1 (1) | Common to Pin 2 (2) | Common to Pin 4 (4) | Common to Pin 8 (8) |
| :--- | :--- | :--- | :--- | :--- |
| **0** | OFF | OFF | OFF | OFF |
| **1** | **ON** | OFF | OFF | OFF |
| **2** | OFF | **ON** | OFF | OFF |
| **3** | **ON** | **ON** | OFF | OFF |
| **...** | ... | ... | ... | ... |
| **9** | **ON** | OFF | OFF | **ON** |
---
### 4. Common Applications
These parts are used in hardware where "set and forget" configuration is required:
* **Industrial Controls:** Setting Modbus or CAN bus node IDs.
* **Telecommunications:** Configuring frequency bands or hardware addresses.
* **Consumer Electronics:** Setting region codes or internal hardware modes.
* **Medical Equipment:** Calibrating sensor gain levels at the factory level.
---
- ⤷
What is the difference between BCD and Gray code in these switches?
- ⤷ How do I interpret the 'R/E' suffix if the manufacturer is Nidec Copal?
- ⤷ What are the recommended soldering profiles for this component?