SD10-R47
AI

The **SD10-R47** is a high-performance, surface-mount (SMD) power inductor commonly used in DC-DC converters and power management circuits. It belongs to the SD series, known for its low profile and high power density.
---
## 1. Core Technical Specifications
The "R47" in the part number indicates its inductance value. Below are the primary electronic characteristics:
| Parameter | Specification |
| :--- | :--- |
| **Inductance** | 0.47 µH |
| **Tolerance** | ±20% |
| **DC Resistance (DCR)** | ~0.0247 Ω (Typ) |
| **Rated Current (Irms)** | ~2.59 Amps |
| **Saturation Current (Isat)** | ~4.16 Amps |
| **Core Material** | Ferrite |
| **Operating Temperature** | -40°C to +125°C |
---
## 2. Structural Composition
The SD10-R47 is engineered for efficiency in small spaces. Its construction consists of three main components:
### A. Ferrite Core
It utilizes a shielded ferrite core. This design contains the magnetic flux within the component, significantly reducing **Electromagnetic Interference (EMI)** with neighboring components on the PCB.
### B. Copper Winding
A flat or round copper wire is wound around the core. The "R47" version uses relatively thick wire to achieve a very low DCR, which minimizes power loss due to heat (I²R loss).
### C. Termination (Pads)
The part features solder-plated terminals designed for **Surface Mount Technology (SMT)**. These pads are typically lead-free and compatible with reflow soldering processes.
---
## 3. Functional Roles in a Circuit
In electronic systems, the SD10-R47 performs several critical tasks:
1. **Energy Storage:** In switching regulators (Buck/Boost), it stores energy in its magnetic field during the "on" cycle and releases it during the "off" cycle.
2. **Current Smoothing:** It acts as a low-pass filter, smoothing out the high-frequency ripples generated by switching power supplies to provide a stable DC voltage.
3. **Noise Suppression:** It blocks high-frequency AC noise while allowing DC current to pass through freely.
---
## 4. Common Applications
Due to its 0.47µH inductance and high current rating, it is found in:
* **Mobile Devices:** Smartphones and tablets for internal voltage regulation.
* **Computing:** VRM (Voltage Regulator Modules) for CPUs and GPUs.
* **Portable Electronics:** Digital cameras and handheld gaming consoles.
- ⤷
What is the difference between Irms and Isat for this inductor?
- ⤷ How does the shielded design of the SD10 series impact PCB layout?
- ⤷ Can this inductor be used in high-frequency switching regulators above 1MHz?