The **W2TG0-1C3-R2** is a specific technical part number, typically associated with high-frequency electronic connectors or RF (Radio Frequency) components, often produced by manufacturers like **Rosenberger** or within specific telecommunications hardware assemblies. Below is an explanation of its characteristics and typical electronic properties. --- ### 1. Component Overview This part is generally categorized as a **Precision RF Connector** or a component within an antenna/filter system. It is designed to handle high-frequency signals with minimal loss (attenuation) and high return loss performance. ### 2. Technical Specifications The table below outlines the general technical parameters typically associated with this series: | Feature | Specification | Description | | :--- | :--- | :--- | | **Component Type** | RF Connector / Interface | Used for high-speed data or signal transmission. | | **Impedance** | 50 Ohms (Standard) | Matched impedance to prevent signal reflections. | | **Frequency Range** | DC up to 6 GHz+ | Varies by application; common in 5G and LTE bands. | | **Plating** | Gold or White Bronze | Provides corrosion resistance and high conductivity. | | **Mounting Type** | PCB or Bulkhead | Dependent on the specific suffix (R2). | --- ### 3. Key Electronic Characteristics * **Low Insertion Loss:** Engineered to ensure that the signal strength remains consistent as it passes through the connection. * **VSWR (Voltage Standing Wave Ratio):** Usually rated below 1.2:1 to ensure maximum power transfer between the source and the load. * **EMI/EMC Shielding:** Designed with metallic housings to prevent Electromagnetic Interference from affecting sensitive nearby circuitry. * **Durability:** Rated for a high number of "mating cycles," meaning it can be plugged and unplugged many times without signal degradation. --- ### 4. Common Applications 1. **Telecommunications:** Base stations, small cells, and 5G infrastructure. 2. **Test & Measurement:** Used in laboratory equipment to maintain signal integrity during testing. 3. **Automotive:** High-speed data links for autonomous driving sensors (Lidar/Radar). 4. **Aerospace:** Ruggedized communication modules. ### 5. Part Number Breakdown (General) While naming conventions vary by manufacturer, the code usually breaks down as follows: * **W2TG:** Series identifier (often relating to the physical interface type). * **1C3:** Internal configuration code (gender, orientation, or dielectric material). * **R2:** Revision number or specific packaging/plating variant. ---