The **WRS-322-R** is a specific model of an electronic switch, typically categorized as a **Rocker Switch**. These components are widely used in consumer electronics, industrial equipment, and power strips to manually interrupt or connect an electrical circuit. --- ### 1. Technical Specifications The WRS-322-R generally follows these electrical parameters: | Parameter | Specification (Typical) | | :--- | :--- | | **Switch Type** | Rocker Switch | | **Circuitry** | DPST (Double Pole Single Throw) | | **Contact Rating** | 16A 250V AC / 20A 125V AC | | **Illumination** | Non-Illuminated (Usually) | | **Termination** | Quick Connect / Solder Terminals | | **Mechanical Life** | >10,000 Cycles | --- ### 2. Key Electronic Components & Materials The device consists of several critical internal and external parts: * **Actuator (Button):** The plastic part that the user presses. In the "R" series, this is often a rectangular rocker. * **Housing:** Made of heat-resistant thermoplastic (UL 94V-2 or higher) to prevent melting during high-current operation. * **Stationary Contacts:** Fixed metal plates inside the switch that connect to the external terminals. * **Moving Contacts (Movable Arm):** A spring-loaded copper or brass leaf that "rocks" back and forth to bridge the gap between stationary contacts. * **Contact Points:** Often plated with **Silver (Ag)** or a silver alloy to ensure low contact resistance and prevent oxidation. --- ### 3. Circuit Configuration: DPST The "322" designation often implies a **Double Pole, Single Throw** configuration. * **Double Pole (DP):** It controls two separate circuits simultaneously. * **Single Throw (ST):** It has only two positions: **ON** and **OFF**. * **Application:** This is commonly used to disconnect both the "Live" and "Neutral" wires in an AC circuit for safety. --- ### 4. Dimensional and Mounting Features * **Snap-in Mounting:** The "R" suffix often refers to the rectangular shape designed to snap into a pre-cut hole in a metal or plastic panel without the need for screws. * **Terminals:** Usually 6.3mm (1/4 inch) spade terminals, allowing for easy connection via crimp connectors.