HDF92MS24 / Shoulder Electronics Limited.

HDF92MS24 Datasheet with Chat AI

Hello, Please ask a question about HDF92MS24 Datasheet

# Example questions: ➢ What is the acceptable tolerance for the center frequency of 9025 mhz, based on the specification for fc+/-100 khz?
➢ What is the duration and temperature profile for the temperature cycling test this filter must withstand?
➢ What is the maximum rf power dissipation this saw filter can handle without performance degradation?

Part No.	HDF92MS24
Manufacturer	SHOULDER
Size	136 Kbytes
Pages	6 pages
Description	This specification shall cover the characteristics of SAW filter 92.025MHz with used for remote-control security.

Datasheet Summary with AI

️· High Temperature Exposure: +85°C for 16 hours
️· Low Temperature Exposure: -40°C for 16 hours
️· Temperature Cycling: -40°C to +85°C
️· Solder Heat Resistance: 260°C ±10°C for 10±1 sec
️· Solderability: 245°C ±5°C for 5s
️· Mechanical Shock: Drop from 1m
️· Vibration: 1.5mm amplitude at 10-55Hz

## Remark
️· Avoid static voltage.
️· Avoid ultrasonic cleaning.
️· Solder only the leads of the component.
️· All dimension tolerance is <0.2mm.

# SAW Filter HDF92M SMD-24 Specification

## Electrical Characteristics
️· Center Frequency: 92.025 MHz
️· Insertion Loss: 5.5 dB max
️· -1dB Passwidth: 20 kHz min, 50 kHz typ
️· -3dB Passwidth: 30 kHz min, 60 kHz typ
️· Pass Band Ripple: 1.0 dB max (+/-15kHz)
️· Fc+/-100kHz: 32.0 dB min
️· Fc+200kHz~+500kHz: 22.0 dB min
️· Fc+500kHz~+1000kHz: 37.0 dB min
️· Fc-300kHz~-900kHz: 52.0 dB min
️· Fc-900kHz~-920kHz: 56.0 dB min
️· Fc-920kHz~-1000kHz: 52.0 dB min
️· Input Power: 0 dBm
️· Group Delay Variation: 4 µs pk-pk
️· Operating Temperature: -40°C to +85°C
️· Storage Temperature: -45°C to +85°C

## Environmental Tests

️· High Temperature Exposure: +85°C for 16 hours
️· Low Temperature Exposure: -40°C for 16 hours
️· Temperature Cycling: -40°C to +85°C
️· Solder Heat Resistance: 260°C ±10°C for 10±1 sec
️· Solderability: 245°C ±5°C for 5s
️· Mechanical Shock: Drop from 1m
️· Vibration: 1.5mm amplitude at 10-55Hz

## Remark
️· Avoid static voltage.
️· Avoid ultrasonic cleaning.
️· Solder only the leads of the component.
️· All dimension tolerance is <0.2mm.