Features
■ Medium weight Release Liner − Steam, EtO & Gamma compatible
■ Easy to apply
■ − Clear Strong Film Carrier
■ Adheres to a wide range of substrates Composition: Tape Caliper, without liner 4.5 mil (0.11 mm) Double Coated Polyester Tape Carrier 0.92 mil (0.023 mm) Transparent Polyester Film Adhesive Synthetic Rubber Based, designed for medical/surgical use Release Liner 60 lb. Bleached Kraft paper, silicone release coated both sides (3.5 mil/0.09 mm) Typical Properties+: 180° Peel Adhesion to Stainless Steel 120 oz/inch width (3.4 Kg/25 mm) (33.4 N/25 mm) Liner Release 23 gm/inch width (23 gm/25 mm) +3M test methods are available upon request. Roll Description: Tape supplied on 3 inch (76 mm) diameter cores. Length 700 yards (640 m) ± 2% Maximum Width 48 inch (122 cm) ± 1/32 in (1.0 mm) Splices: Splices on the tape are intended for continuous processing. Roll Width Maximum Number of Splices per Roll < 8 inch (20 cm) 2 per 100 yd (91 m) 3 per 200 yd (183 m) 8 per 700 yd (640 m) Information on the splice frequency in roll widths greater than 8 inch (20 cm) is available upon request. Packaging and Recommended Storage Product as supplied in original packaging will maintain stated properties for a period of two years from date stamped on shipping container when stored at temperatures of 50-80°F (10-27°C) and a relative humidity of 40-60 percent. Please see reverse side for important product, safety and warranty information.