FEATURES
• 150 °C long term stability (5000 h dry heat)
• Easy mounting using ring tongue terminal
• Rugged construction
• Cable with ETFE insulation according to
NEMA HP-3, type Z, rated 600 VRMS, cable test
voltage 3.4 kV
• AEC-Q200 qualified (grade 1)
• cULus recognized, file E148885
(UL category XGPU2/XGPU8)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912

APPLICATIONS
Suitable for surface sensing applications, especially when a
good electrical insulation and a good thermal contact with
the chassis is required for:
• Automotive equipment
• EV and battery management
• Power electronics, heat sink
• Consumer appliances

DESCRIPTION
A NTC thermistor chip is soldered to AWG#26
multi-stranded silver plated copper leads with ETFE
insulation and insulated with epoxy coating. The insulated
sensor is attached to a tin plated copper ring lug via a middle
buffer layer. The lead wires are twisted.