EVAL-M1-05-65D is a complete evaluation board including a 3-phase IPM for motor drive application. The kit
demonstrates Infineon’s IPM technology for motor drives.
Main features of CIPOS™ Micro Intelligent Power Module IRSM515-065 and IRSM505-065 are:
• 3-phase inverter including high voltage gate drivers
• Integrated bootstrap functionality
• Trench FREDFET with RDS(on) of 1.3 Ω @ 25°C
• Under voltage lockout for all channels
• Matched propagation delay for all channels
• Temperature feedback via NTC applicable for IRSM505-065
• Optimized dV/dt for loss and EMI trade off
• 3.3 V logic compatible and advanced input filter
• Possibility to choose single shunt or leg shunt current sensing
• Driver tolerant to negative transient voltage
• Isolation 1900 Vrms, 1min
• Certified by UL file number E252584
The evaluation board characteristics are:
• Nominal input voltage 240 VAC
• 20 – 150 W motor power range without heatsink
• On board EMI filter
• Current sensing for each phase configured by default
• Over current protection
• Sensing of DC-link voltage
• Thermistor output
• Fault diagnostic output
• Measurement test-points compatible to standard oscilloscope probes
• PCB is 90 x 75 mm and has two layers with 35 μm copper each
• RoHS compliant