Features
Single-Phase 32A 200-240V ATS PDU Distributes and Monitors Network-Grade Power in Real Time
This monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via its
built-in network interface. Ideal for network IT applications, small computer rooms and other equipment
rack applications, the PDUMNH32HVAT2 features 16 C13 and 2 C19 outlets in two load banks, each
bank protected by a 20A circuit breaker. Dual three-meter power cords with IEC 309 32A Blue inputs
connect to separate primary and secondary mains circuits, backup generators, UPS systems or utility
power grids, including out-of-phase sources.

Switches from Primary to Secondary Power Source in Milliseconds
Dynamic solid-state automatic transfer switching (ATS) allows the PDU to switch to the secondary source
within 1-5 milliseconds, should the primary source fail or become unstable, to ensure your connected
equipment operates without interruption. An on-board ATS processor constantly evaluates the power
quality of both input sources. It prevents switching if the secondary source is unavailable or of lower
quality than the primary source.

Built-In LX Platform Network Management Card Allows Remote Access 24/7
The Java-free HTML5-based WEBCARDLX network interface enables full remote access for PDU status
monitoring and email notifications via secure web browser, SNMP, telnet or SSH. The latest version of
PowerAlert Device Manager (PADM20) provides enhanced remote management capabilities, including
customizable dashboard graphs to fit user preferences. The PADM20 upgrade and Tripp Lite’s PowerAlert
Element Manager (PAEM) form a powerful tool for expanding maintenance functions in large installations,
including firmware update checks and backup and restoration of device configurations.

Digital Load Meter Helps Prevent Potentially Expensive Overloads
A digital ammeter reports the total load for all connected equipment in amps and kilowatts. Monitoring
capacity helps ensure load levels remain well below maximum capacity levels with no danger of overload
that could lead to costly downtime or damaged equipment. Maintaining proper load levels, even while
adding new equipment, can keep your TCO (total cost of ownership) low. Current monitoring provides 1%
billing grade accuracy.
Mounts into 2U of Rack Space or on a Wall