1 Features
• High-efficiency, 1.5-MHz, synchronous switching
mode buck charger for single cell battery
– >90% efficiency down to 25-mA charge current
from 5-V input
– Charge termination from 10 mA to 620 mA, 10-
mA steps
– Flexible JEITA profile for safe charging over
temperature
• BATFET control to support shutdown, ship mode
and full system reset
– 1.5-μA quiescent current in battery only mode
– 0.15-μA battery leakage current in ship mode
– 0.1-μA battery leakage current in shutdown
• Supports USB On-The-Go (OTG)
– Boost mode operation supporting 3.84-V to 9.6-
V output
– >90% boost efficiency down to 100-mA OTG
current for 5-V VBUS
• Supports a wide range of input sources
– 3.9-V to 18-V wide input operating voltage
range with 26-V absolute maximum input
voltage
– Maximizes source power with input voltage
regulation (VINDPM) and input current
regulation (IINDPM)
– VINDPM threshold automatically tracks battery
voltage
• Efficient battery operation with 15-mΩ BATFET
• Narrow VDC (NVDC) power path management
– System instant-on with depleted or no battery
– Battery supplement when adapter is fully
loaded
• Flexible autonomous or I2C-controlled modes
• Integrated 12-Bit ADC for voltage, current,
temperature monitoring
• High accuracy
– ±0.5% charge voltage regulation
– ±5% charge current regulation
– ±5% input current regulation
• Safety
– Thermal regulation and thermal shutdown
– Input, system, battery overvoltage protection
– Battery, converter overcurrent protection
– Charging safety timer

2 Applications
• Tablet
• Gaming and Computer Accessories
• IP Camera, EPOS
• Portable Medical Equipment

3 Description
BQ25620 and BQ25622 are a highly-integrated 3.5-
A switch-mode battery charge management and
system power path management device for single
cell Li-Ion and Li-polymer batteries. The solution is
highly integrated with built-in current sensing, loop
compensation, input reverse-blocking FET (RBFET,
Q1), high-side switching FET (HSFET, Q2), lowside
switching FET (LSFET, Q3), and battery FET
(BATFET, Q4) between system and battery. It uses
narrow VDC power path management, regulating the
system slightly above the battery voltage without
dropping below a configurable minimum system
voltage. The low impedance power path optimizes
switch-mode operation efficiency, reduces battery
charging time, extends battery life during discharging
phase, and the ultra-low 0.15-μA ship mode current
extends battery shelf life. The I2C serial interface with
charging and system settings makes BQ25620 and
BQ25622 truly flexible solutions.