Features
■Threaded barrel, M12/M8
■Chrome-plated brass
■DC 3- wire, 10…30 VDC
■Programmable (NC/NO) with teach adapter
VB2‐SP1
■M12 x 1 connector
Functional principle
The weld sensors are available in different
versions, with different signal intensities
and diameters. Ferromagnetic parts which
differ strongly in their material properties and
diameters can thus be detected. A target part
has to be located within the so called sensitive
area in order to be detected. The internal
sensor signal reaches the maximum intensity if
the sensitive area is completely covered by the
target. Partial coverage is also possible.
Sensitive area S = 11mm
Within this area the sensor signal changes
when components are connected.
Maximum range M = 14mm
In case of complete coverage of the sensitive
area the maximum signal intensity is achieved.