|
ntroduction
Kintex®-7 FPGAs are available in -3, -2, -1, -1L, and -2L
speed grades, with -3 having the highest performance. The
-2L devices are screened for lower maximum static power
and can operate at lower core voltages for lower dynamic
power than the -2 devices. The -2L industrial (I) temperature
devices operate only at VCCINT = 0.95V. The -2L extended (E)
temperature devices can operate at either VCCINT = 0.9V or
1.0V. The -2LE devices when operated at VCCINT = 1.0V, and
the -2LI devices when operated at VCCINT = 0.95V, have the
same speed specifications as the -2 speed grade, except
where noted. When the -2LE devices are operated at
VCCINT = 0.9V, the speed specifications, static power, and
dynamic power are reduced. The -1L military (M)
temperature devices have the same speed specifications as
the -1 military temperature devices and are screened for
lower maximum static power.
Kintex-7 FPGA DC and AC characteristics are specified in
commercial, extended, industrial, and military temperature
ranges. Except for the operating temperature range or
unless otherwise noted, all the DC and AC electrical
parameters are the same for a particular speed grade (that
is, the timing characteristics of a -1 speed grade military
temperature device are the same as for a -1 speed grade
commercial temperature device). However, only selected
speed grades and/or devices are available in each
temperature range.
All supply voltage and junction temperature specifications
are representative of worst-case conditions. The parameters
included are common to popular designs and typical
applications.
Available device and package combinations can be found in:
• 7 Series FPGAs Overview (DS180)
• Defense-Grade 7 Series FPGAs Overview (DS185)
This Kintex-7 FPGA data sheet, part of an overall set of
documentation on the 7 series FPGAs, is available on the
Xilinx website at www.xilinx.com/documentation.
|