▪ Two Power Supply Inputs:
• 2.5 V (±8 %) to 5.0 V (±10 %) VDD
• 3.3 V (±9 %) to 12.0 V (±10 %) VDD2
▪ Four High Voltage High Current Drive GPOs
• Dual/Single Full Bridge Driver Option
• Quad/Dual/Single Half Bridge Driver Option
• Slew Rate Modes:
◦ Motor Driver Mode
◦ Pre-Driver (MOSFET Driver) Mode
• Sleep Function
• Low RDS(ON) High-side + Low-side resistance =
0.4 typical
• 2 A Peak, 1.5 A RMS per Full Bridge
(at VDD2 = 5 V, TA = 25 °C) [1]
• 4 A Peak, 3 A RMS per two Full Bridge connected
in parallel (at VDD2 = 5 V, TA= 25 °C) [1]
• 2 A Peak, 1.5 A RMS per Half Bridge GPO
(at VDD2 = 5 V, TA = 25 °C) [1]
• Integrated Protections:
◦ Over Current Protection (OCP)
◦ Short Circuit Protection
◦ Under-Voltage Lockout (UVLO)
◦ Thermal Shutdown (TSD)
• SENSE_A, SENSE_B Inputs that are connected to
the Current Comparators for Current Control
• Fault Signal Indicator individual per Full Bridge:
◦ OCP
◦ UVLO
◦ TSD
▪ Differential Amplifier with Integrator and Comparator
for Motor Speed Control Function
▪ Two Current Sense Comparators with Dynamical Vref Mode