o MIC2941 regulator has guaranteed 1.25A output
o Low dropout, only 40mV - 400mV compared to 1.25V - 2.0V for LM317. This means you can use
a wider range of output voltages including generating 3.3V from as low as 3.7V (such as 3 AA's or
a lithium ion battery)!
o Short circuit and overheating protection
o Input diode to protect circuitry from negative voltages or AC power supplies.
o 2.1mm DC jack and terminal connector for voltage inputs
o Two indicator LEDs for high and low voltages
o Output selection switch to select from 3.3v, 5v and Adjustable (also has a breakout for the
voltage you're powering the boad with)
o Onboard potentiometer for adjusting voltage from 1.25V up to within 0.5V of the input voltage.
(20V max)
o On/Off switch for entire board
o Heat sink included