Controlled Baseline
− One Assembly/Test Site, One Fabrication
Site
Extended Temperature Performance of
−40°C to 125°C
Enhanced Diminishing Manufacturing
Sources (DMS) Support
Enhanced Product-Change Notification
Qualification Pedigree†
ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 150 V
(TLV2252/52A) and 100 V (TLV2254/54A)
Using Machine Model (C = 200 pF, R = 0)
Output Swing Includes Both Supply Rails
Low Noise . . . 19 nV/√Hz Typ at f = 1 kHz
Low Input Bias Current . . . 1 pA Typ
Fully Specified for Both Single-Supply and
Split-Supply Operation
Very Low Power . . . 34 μA Per Channel
Typ)
Common-Mode Input Voltage Range
Includes Negative Rail
Low Input Offset Voltage:
850 μV Max at TA = 25°C
Wide Supply Voltage Range:
2.7 V to 16 V
Macromodel Included

description/ordering information
The TLV2252 and TLV2254 are dual and
quadruple low-voltage operational amplifiers from
Texas Instruments. Both devices exhibit rail-to-rail
output performance for increased dynamic range
in single- or split-supply applications. The
TLV225x family consumes only 34 μA of supply
current per channel. This micropower operation
makes them good choices for battery-powered
applications. This family is fully characterized at
3 V and 5 V and is optimized for low-voltage
applications. The noise performance has been
dramatically improved over previous generations
of CMOS amplifiers. The TLV225x has a noise
level of 19 nV/√Hz at 1kHz, four times lower than
competitive micropower solutions.
The TLV225x, exhibiting high input impedance
and low noise, are excellent for small-signal
conditioning for high-impedance sources, such as
piezoelectric transducers. Because of the micropower
dissipation levels combined with 3-V
operation, these devices work well in hand-held
monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single or split supplies
makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision
applications, the TLV225xA family is available and has a maximum input offset voltage of 850 μV.