Description
The constant monitor provides worksurface monitoring. This system is fully automatic and activates when a wrist strap is plugged into the unit. A green light indicates connection and a red light indicates there is no connection (disconnected status). The unit is powered and grounded by the AC adapter.
The monitor meets the continuous monitor requirements of ANSI/ESD S20.20. “Typical test programs recommend that wrist straps that are used daily should be tested daily. However, if the products that are being produced are of such value that knowledge of a continuous, reliable ground is needed, and then continuous monitoring should be considered or even required.” (ESD Handbook ESD TR20.20 Wrist Strap section 5.3.2.4.4 Test Frequency)

Features
• Compatible with single wire wrist straps
• Easy to use
• Easy to install
• Fully automatic

Description
ESD Wrist Strap On-line Monitor and Tester