1 Features
1• H-Bridge Motor Driver
– Drives a DC Motor or Other Loads
– Low MOSFET On-Resistance: HS + LS 1 Ω
• 1-A Maximum Drive Current
• 0- to 11-V Operating Supply-Voltage Range
• Standard PWM Interface (IN1/IN2)
• Low-Power Sleep Mode With 120-nA Maximum
Sleep Current
– nSLEEP pin
• Small Package and Footprint
– 8 WSON (With Thermal Pad)
– 2.0 × 2.0 mm
• Protection Features
– VCC Undervoltage Lockout (UVLO)
– Overcurrent Protection (OCP)
– Thermal Shutdown (TSD)

2 Applications
• Cameras
• DSLR Lenses
• Consumer Products
• Toys
• Robotics
• Medical Devices

3 Description
The DRV8837C device provides an integrated motor
driver solution for cameras, consumer products, toys,
and other low-voltage or battery-powered motion
control applications. The device can drive one DC
motor or other devices like solenoids. The output
driver block consists of N-channel power MOSFETs
configured as an H-bridge to drive the motor winding.
An internal charge pump generates needed gate
drive voltages.
The DRV8837C device can supply up to 1 A of output
current. The device operates on a motor power
supply voltage from 0 to 11 V, and control logic can
operate on 1.8-V to 5-V rails.
The DRV8837C device has a PWM (IN/IN) input
interface.
Internal shutdown functions are provided for
overcurrent protection, short circuit protection,
undervoltage lockout, and overtemperature.